Eastern Counties Omnibus Company
1957
Bristol SC4LK
ECW B35F

Before researching the facts about the Bristol SC for this caption, I had somehow presumed that Crosville would have been the largest customer for the type. In fact I was surprised to find that they were only the third largest, having bought a total of 79. 323 were built altogether between 1954 and 1961, being supplied to nine BTC operators. Lincolnshire Road Car had the most with an amazing 113, and Eastern Counties was in second place having bought 88.
One of the latter’s examples is shown here preparing to depart the former Drummer Street Bus Station in Cambridge on 11th July 1970. LC540 (VVF 540) was an SC4LK with E.C.W. B35F body, new in 1957 and withdrawn in 1971.

Photograph and Copy contributed by John Stringer

---

06/10/13 – 08:10

Memories of childhood visits to Skeggie, Ingoldmills and Cleethorpes. I think they were pretty little rural buses – but the puny 4 cylinder engines did nothing for me.

David Oldfield

---

06/10/13 – 11:35

Geographically, United must have been one of the biggest of the Tilling group companies, and I imagine the fleet went well into four figures. Several rural depots would only have two or three vehicles, but I don’t ever remember seeing one of this type in the Newcastle area. But that’s not to say they didn’t have any, can anyone enlighten us?

Ronnie Hoye

---

06/10/13 – 14:31

As David says, the SC’s were bonny looking little buses, but their looks betrayed the reality !
Despite serving many and widespread rural areas United sensibly stayed well clear of the model – imagine an SC with a full load of happy holidaymakers climbing Lythe Bank out of Sandsend. They wouldn’t have been so happy for long, nor been able to hold much of a conversation !

John Stringer

---

06/10/13 – 17:44

Another trip to the best served destination in East Anglia, the mythical town of SERVICE!

Nigel Turner

---

06/10/13 – 18:01

I recall trying one of Lincolnshire Road Car’s SC4LKs on the town service during my time working in Goole between 1966 and 1969. It is a long time ago now but I remember thinking they did not bear comparison with the "proper" buses I had become used to in Sheffield!

Stan Zapiec

---

06/10/13 – 18:23

"Service" may well have been the best served destination in East Anglia but "Duplicate" was equally well served in Crosville’s bailiwick during the 1950s – and often without a route number!
Whilst on the subject of "helpful" destinations. Can anyone enlighten me on the difference between "Reserved", "Special" and "Private", all three of which appeared together on the blinds of many North West municipality vehicles. I can see reasons for each but a vehicle reserved for a special trip for a private party would probably cause some head scratching for the crew as to which blind to set!

Phil Blinkhorn

---

06/10/13 – 18:24

I don’t think I’ve ever before seen a picture of one of these buses in red and cream, and they appear even prettier when dressed thus. This is no reflection of course on their many sisters who seemed to prefer green frocks.

Chris Youhill

---

07/10/13 – 08:25

I have many happy memories of rides on SC4LK’s, mostly with Crosville, but also Cumberland, Vaggs of Knockin Heath and Silver Star of Caernarfon. They were incredibly characterful, with enjoyable sounds and at times a lively performance, although they struggled on hills. The only down side was the lack of forward vision, with partitions and handrails round the forward entrance.
United didn’t have any SC’s, but if they had it is unlikely that they would have been used to climb Lythe Bank the SC4LK was a "niche model" used on minor, lightly loaded rural routes, usually on narrow lanes.
The SC4LK was reputed to do 20 – 25 mpg in service. This is probably the main reason they were so popular among the North Wales independent operators.

Don McKeown

---

07/10/13 – 08:26

Apart from the 88 which went to Eastern Counties, only 15 SCs were built for "red" operators. So just under a third of the total built were red.
Three Eastern Counties SCs are preserved, but the other 17 known survivors are all green.

Geoff Kerr

---

07/10/13 – 09:32

Thanks Geoff, I’ve never actually travelled on one of these buses and would like to do so sometime – maybe I’ll come across one at a rally, and red or green wouldn’t matter for a "test ride."

Chris Youhill

---

07/10/13 – 13:58

…..but at least they were lighter, and therefore better, than the other Eastern Counties specials; 4LW powered Ls, let alone the LS4LW!

David Oldfield

---

07/10/13 – 13:59

Don’t think I ever rode on one. Of course, the SC was the only Bristol type never to have been operated by Bristol Tramways/Omnibus!

Geoff Kerr

---

07/10/13 – 14:00

They were quite adequate for many parts of Lincolnshire, where gradients are unknown, and spot-heights on old ordnance survey maps only occasionally rose to the dizzy height of 20 feet above sea level! Lincolnshire RCC had a network of rather infrequent routes serving these fenlands, where, no doubt, they served adequately and economically. However I remember encountering one on a Winter Sunday evening about 1958, on route 3 from Cleethorpes to Lincoln. This service crossed the ridge of the Lincolnshire wolds, and in the region of Binbrook where there were gradients as steep as 1 in 6. The almost full SC4LK made very heavy weather of it – walking pace, and a deafening scream in first gear.

Stephen Ford

---

07/10/13 – 14:01

The best served ‘place’ these days is surely
"SORRY – NOT IN SERVICE".
A lady passenger once complaining to me about the lack of service said she was going to move there, as all the buses seemed to go to it.

Stephen Howarth

---

07/10/13 – 17:42

Was it the SC that was known as the Tilling Bedford? The niche in the market and engine output were similar to the SB but, more to the point, the axles were supplied by Bedford.

David Oldfield

---

07/10/13 – 17:44

The bus in this photo should be showing "WATERBEACH" for service 150, from Drummer St., it travelled along Newmarket Rd., and via Clayhithe.
I used to ride home on these vehicles from school at Soham to Ely service 116, and only nine years later I was driving them. They were OK in the fens, but I didn’t like them as they were noisy and rattled a lot, plus having to twist round in one’s seat to issue tickets. The gear positions were different as well and it was a real disappointment to get one allocated for a duty, usually as a replacement bus after a breakdown.

Norman Long

---

08/10/13 – 07:44

The figures in the caption are interesting; 323 built of which a total of 280 were purchased by the three mentioned companies, only leaving 43 for the rest!
In the 1960s my sister lived in various locations in the Barmouth area and I’m fairly sure I will have had one or two trips on these. From recollection the services north of Barmouth were in the hands of firstly Bristol Ks and later a Lodekka (for many years DLB 911) but an SC could sometimes be found on the S34 to Dolgellau.

Dave Towers

---

09/10/13 – 08:25

Ever plagued by if-only-osis, I can’t help wishing that Gardner had been able to offer a 4LK with an extra half inch on the bores, ie 4.25" instead of 3.75", which would have boosted the capacity from 3.8 to nearly 4.9 litres. The extra torque would have improved acceleration and hill-climbing enormously, and with the engine running at lower revs for much of the time things would have been quieter too. The SC4LK’s excellent fuel consumption probably wouldn’t have suffered either. Even more exciting: there’s a YouTube of a turbo-charged 4LK (definitely NOT a Gardner option) in some vehicle or other. Considering the difficulty of fitting an off-the-peg turbocharger to any engine not designed to take one, it would be interesting to hear how this owner’s engine fares over the long term.
All that aside, an "official" 4LKTC would have transformed the Bristol SC.
A question to Norman Long, with his SC driving experience:
Was the steering as nice as on heavyweight Bristols, or did it all feel a bit Bedfordish?

Ian Thompson

---

09/10/13 – 17:41

Reply to Ian…
I seem to remember that SC’s, which we all referred to as LC’s, were not at all heavy to drive, certainly not when compared with MW’s (to us LM’s). I have driven a few Bedford Coaches (again, to us CB’s), and I think they were heavier. I didn’t like the thinness of the steering wheels on the early Bedfords (same as the TK lorry) and much preferred a nice fat wheel that one can haul round on a slow corner much more comfortably, especially if there is no power steering fitted. Another thing about the SC’s was that they were very draughty in the winter and you really would need an overcoat!!!

Norman Long

---

11/10/13 – 06:59

Here are two more photos of Eastern Counties Bristol SC4LKs. TVF 533 (ECOC LC533) is seen in Cambridge, Drummer Street Bus Station on 26 August 1959 on yet another timetabled journey to the intensely bussed destination of "Service". It is, in fact, on one of the rural routes out towards Ely. This bus was delivered to the operator in January 1957.

6559 AH (LC 559), dating from September 1959, is pictured (if my recollections are correct) near RAF Watton in August 1960. Remarkably, it is displaying its correct destination ‘Norwich’. Much of the old Watton airfield has now been obliterated by new housing development.

Tillingbourne had three SCs in 1971, two of which (TVF 537 and 6560 AH) began life with ECOC, whilst the third (790 EFM) came from Crosville. As other contributors have pointed out, the David Brown gearbox had a curious selector sequence. R/1/2&3 were in the logical positions popularised by the AEC Reliance, with R&1 protected by a detente spring from accidental engagement. Sadly, this spring became very weak over time, and one had to watch out not to pull away in reverse rather than second gear. From third gear, the stick had to be manoeuvred in an inverted ‘U’ fashion back again to engage fourth, and fifth lay immediately forward of fourth. The Tillingbourne SCs were often used on the hilly Guildford – Peaslake service which included a long climb up the scarp face of the North Downs from Shere to Newlands Corner, and, in the opposite direction, the lengthy drag up the dip slope from Merrow to Newlands Corner. This topography was very different from the flat lands of East Anglia and Lincolnshire, though the Crosville examples would probably have met some hills in their lives. The 3.8 litre Gardner 4LK developed 57 bhp at 2100 rpm, and it certainly spent much of its life at those revs in the SC, with deleterious effects upon one’s hearing. Later production 4LKs were rated at 60 bhp, though I cannot believe that this would have made any material difference. The gaps between the gears meant that the engine had to be taken to high revs to change up, but, on the rare occasions when fifth could be engaged (downhill or with a following wind on the flat) this little bus could fly. The 4LK certainly had to work hard in the SC, but its reputation for reliability was always exemplary. I believe that only the axles for the SC were sourced from Bedford. As far as I can now recall, the steering was entirely positive in action.

Roger Cox

---

11/10/13 – 16:05

By the time I started working for E.C.O.C. in 1970, the Bristol SC’s were on their last legs, and we were enjoying the comparative luxury of driving RLE’s etc.. although a town duty was almost always a Bristol LKH or LKD/LFS; the North Arbury route (130) was allocated the more powerful 6cyl FLF’s with more seats available. The LKH’s were withdrawn around 1971 I think…such a long time ago!
A very nice photo of TVF 533 leaving Drummer Street, Cambridge. It’s correct destination should read— 120 Gt Eversden, travelling through Grantchester and Barton which is to the south west of the city.

Norman Long

---

12/10/13 – 07:52

Thanks for your correction about route 120, Norman. I was working from memory (a decidedly risky procedure at my time of life) and did not check my recollections with Paul Carter’s comprehensive volume "Cambridge 2".

Roger Cox

---

13/10/13 – 08:01

The suggestion made by Ian Thompson of a 4LK with the increased 4¼ bore of the LW is, in fact, more than a pipedream. Latil in France were Gardner agents, and they did make such an engine, which proved to be powerful and reliable. Quite what became of the project later is lost in the mists of time, but one can imagine the response of the somewhat megalomaniac Hugh Gardner towards an engine that he could not claim as his own entire creation.

Roger Cox

---

13/10/13 – 08:02

Can "Cambridge 2" still be obtained Roger?…and is it a book about Cambridge in general, or about the city buses…If so, I would very much like to own a copy.

Norman Long

---

13/10/13 – 09:56

Norman, There are two books on this subject by Paul Carter. ‘Cambridge 1’ covers the period up to around 1950, and ‘Cambridge 2’ from that time up to deregulation. They are published by Venture Publications of 128 Pike’s Lane, Glossop, Derbyshire SK13 8EH (tel. 01457 861508) who should be able to help you find copies. This publisher does not have a web page. Paul Carter has also written a comprehensive history of Premier Travel.

Roger Cox

P.S. The Premier Travel book is published by Capital Transport:- www.capitaltransport.com/

---

13/10/13 – 11:53

Venture Publications may not have a website, but the associated MDS Books at the same address has a very extensive one at www.mdsbooks.co.uk Presently both Venture’s ‘Cambridge 1’ and ‘Cambridge 2’ are on special offer at £8 each.

John Stringer

---

13/10/13 – 12:08

The Cambridge 2 book is currently available as a clearance item at reduced price in the Ian Allan bookshop in Manchester, or at least it was on Friday.

David Beilby

---

13/10/13 – 16:37

Thank you all very much…I have now ordered a copy of Cambridge 2, as it covers the time I worked for Eastern Counties,…very much looking forward to it’s arrival.

Norman Long

---

15/10/13 – 07:10

Norman: many thanks for your comments on the steering, and I agree all the way about steering wheels and controls in general: a decently-equipped cab inspires confidence. I’ve never driven an SC or an SU, but the very look of the controls on both suggests that what lies beneath is also solidly made. At Warminster yesterday (Sun 13 Oct) I thoroughly enjoyed a ride on 270 KTA, a lively ex-Western National coach-seated SUL4A, driven with great verve and understanding, but that little engine makes no secret of the hard work it has to do.
Congratulations and thanks, by the way, to everyone responsible for the Warminster event, especially on such a soggy day.
Roger: I was so interested to hear from you that my fictitious bored-out 4LK had actually been tried that I found a "moteurs Latil" site that lists (almost) all the engines fitted to Latil timber tractors. It seems that the company was a great user of the 4LW (as Unipower was for similar work in Britain) and later also of the 6LW.
I couldn’t find the doctored 4LK in question, but I did discover a tractor model H12 of 1949 with a 9.3-litre engine of 114mm (4.488") bore and 6" stroke, which must surely have been a modified 6LW—otherwise why the imperial-dimensioned stroke?
They also did a model M14 between 1949 and 1955, which had a PETROL version of the 4LW!
I realise that I’m way off the bus route, but I greatly enjoyed Chris Y’s Onibury/Stokesay diversion and all those other fascinating spin-offs that have appeared on OBP, just as the background in old photos is often no less interesting than the subject.

Ian Thompson

---

16/10/13 – 06:47

Ian, the reference to the "big bore 4LK" appears in the book ‘Gardner’ by Graham Edge. This book is now out of print, but I understand that it is to be reprinted by Old Pond Publishing to whom Graham Edge has sold his publishing business. Incidentally, Graham Edge (aka Gingerfold) is a contributor to a discussion forum on Gardner engines, mainly lorry orientated, that runs to no less than 52 pages. www.trucknetuk.com/phpBB/  The differing views of contributors become heated to the point of vitriolic personal abuse in places, but some facts do emerge. For example, the well known external oiliness of Gardners lay with Hugh Gardner’s aversion to the use of gaskets on many external mating surfaces. When rebuilt by operators with jointing compound, much of the problem was resolved. (I wouldn’t recommend trawling through the whole 52 pages in one go; the thing gets very, very repetitive.)

Roger Cox

---

16/10/13 – 06:48

Ian, with regard to Roger’s comments, the French Latil and Bernard concerns built Gardner engines under licence, paying royalties to Gardner in the process. Both vehicle builders increased the bore size (and in some cases the rpm) of the Gardners in pursuit of more power, and Latil carried out this modification on ‘le 4LK’ as well as ‘les 4LW et 6LW’ engines. This could explain the 114mm (4.488") bore and 9.3 litres capacity you mentioned, which I presume would have been a Latil modification of the 6LW design. What the top brass at Patricroft thought of this can only be imagined, but no doubt ‘Mr Hugh’ may well have thrown his hands up in the air, spun around three times and locked himself in the nearest cupboard.

Brendan Smith

---

16/10/13 – 12:02

Thanks for the information about Gardner Roger. I have always had the utmost respect for Gardner products, but must admit they did, as you say, have an external oiliness about them in certain areas. The castings were of excellent quality, but many of us couldn’t understand why joints/gaskets were fitted to some components and not others. Sumps for example did not have gaskets, and tended to be one of the areas prone to oiliness. At West Yorkshire, engineering staff used jointing compounds which usually did the trick. In the main we used Good Year gasket shellac (which was a rich brown colour and smelled pleasantly sweet) or ‘Hylomar’ jointing compound (apparently formulated for Rolls-Royce. This was dark blue and didn’t smell as nice!) Quite why Gardner did not fit even simple cardboard sump joints in the first place is a good question, but I’m sure Hugh Gardner would have given an equally good answer…. They were still fine engines though and no mistake.

Brendan Smith

---

10/04/14 – 07:25

I remember the SC’S well as a few for Eastern Counties ran around the Yarmouth area during the 60’s and one in particular LC553 a resident at Yarmouth Depot for a number of years.They operated to my knowledge the 6A to Martham, with a few journeys to Hickling, Stalham and Thurne (village no longer served at all by any Company). Also the 19A to Belton, Haddiscoe and Loddon and probably other lightly loaded routes. Only managed to catch one once. Felt sorry for the driver who had to twist round in his seat every stop to collect fares. One example preserved by the Eastern Transport Collection near Norwich.

Richard

---

26/05/14 – 17:31

ECOC also operated a small number of 33str coach versions of the LC (LSC). In 1968 I bought WAH 875 (LSC 875) from Victoria Coaches, S’end for use in the Bickers of Coddenham fleet. It gave several years of good service. Ipswich Transport Society used it for the last day of Bradford trolleys. Flat out from Ipswich up the A1 overnight – filled up in Bradford with 7 gals! Axles were Austin / BMC, not Bedford.

Eric Mouser

---

22/03/18 – 06:39

I well remember the SC4LK operating for a while when I went up to Cambridge as my girlfriend at the time was at Girton College and if I felt lazy or drank too much the 129 route proved useful in getting back to my digs in central Cambridge, I used to love these vehicles and eventually made a model of the bus from an Anbrico white metal kit which I still have in my model bus collection! Oh those really were the days!

David Kerr

---

24/03/18 – 08:33

A reminder that Cumberland also had some SC buses for use on lightly loaded country services. Taken in 1970 I think the location is Carlisle – I know I was about to board 202 for a scenic ride to somewhere but I no longer have any maps for the area.

Ken Newton

---

13/12/18 – 06:18

Tillingbourne of Chilworth bought this former Eastern Counties SC4LK of 1959, 6560 AH, former fleet number LC 560, in February 1971 and it is seen here ascending the bottom of Guildford High Street on Saturday 29 May 1971 en route to Warren Road. I drove this bus several times myself over the taxing route across the North Downs (at high decibels) to Peaslake until its disposal to Sykes (dealer) at Barnsley after May 1972. There is no further record of it being used as a psv, and by February 1974 it appears to have been sold to another dealer, Carlton, for scrap.

Roger Cox

---

14/12/18 – 06:16

Roger; I can’t remember any buses climbing the High St other than the short length up as far as Quarry St before turning right towards Shalford. But that wouldn’t lead towards Warren Rd.
I suspect that this has just turned right out of Farnham Rd bus station and will then turn right again before going round the loop to Bridge St- Onslow St and North St, in order to get to the top of the town.

John Lomas

---

14/12/18 – 09:17

John, yes, you are right. The Old Town Bridge is behind the bus in the right hand top corner. I was (totally unaccountably – my wife comes from Guildford) thinking of the Farley Green route that that I often worked on Saturdays; this did follow High Street/Quarry Street on the way to Shalford. The Warren Road service lasted only a few months longer after this picture was taken as it was withdrawn on 16 October 1971.

Roger Cox

---

23/09/19 – 05:56

I attach a link to a page I created, with a hope to get one dearly named Elise transported from one end of Ireland to other… as a temporary living space. It has been converted inside. She does not drive anymore but it all kitted out. I did not get any support unfortunately… mostly people do not seem to care for these types of campaigns… oh well. I have not given up. She needs a low loader to do the 400KM journey. I need to give the potential driver the tonnage.
Can anyone help with that? She is a 1957 model, Bristol SC reg no. VVF 551 fleet no. LC551, LC is where she got her nickname from ELSIE.
Be grateful for advise on the weight.
I will keep putting the pennies in the savings pot.
The attached link:- is here

Tanya Bryan

---

26/09/19 – 05:47

I don’t know the answer but I suggest that you contact Patrick Burnside who can definitely answer. His e-mail address can be obtained from his web site www.easterncountiesomnibusco.com

Nigel Turner

---

Vehicle reminder shot for this posting

---

02/11/19 – 05:50

In response to Tanya Brian’s request for the weight, I can give an indication of the weight as built because the SC was designed as a lightweight vehicle and clocked in at just under 4 tons – that’s British Imperial tons by the way; not metric tonnes. Of course, that may not be Elsie’s current weight as, looking at the picture on the website in the link there looks to be a lot of stuff in there which wasn’t part of the original bus.
The lengths they went to in order to save every last ounce was quite incredible. Instead of the usual pressed steel channels shaped to clear the rear axle, on the SC the main chassis members are simply two lengths of straight channel which I think is aluminium. Most bus floors are longitudinal floorboards on transverse joists. On the SC there are no joists and the boards are fitted across the chassis members. In addition, the boards are 5/8" instead of ECW’s usual 7/8". The seat cushions are an inch thinner than normal service bus seats. Restoring ONV 425 in recent years, I wondered who was apparently damaging the side of the roof. It turned out that another way they saved weight was in the thickness of the aluminium used to sheet the vehicle up. When a ladder was rested against it it produced quite sizeable dents!

I have attached a picture of ONV 425 taken in May this year in Usk, having just driven from Winkleigh (Devon), not I hasten to add, on the motorway.

Peter Cook

---

11/11/19 – 07:04

Without going to the SC4LK’s lengths in the quest for lightness, I wish the buses and especially coaches of today could shed a ton or two. I do accept that today’s disappointing fuel consumption is due largely to traffic congestion, the need for right-boot-down driving to make up lost time and the use of automatic transmissions, but vehicle unladen weight must also play a part. Of course, the lighter the vehicle itself gets while still carrying the same human tonnage, the cleverer the suspension needs to be to deal with the difference between fully-laden and empty, but I’m sure that cunning technology can brush away that little problem.

Ian Thompson

---

17/11/19 – 08:49

Ian
Having ridden on most Wright products technology does not yet seem to have found a way to eliminate rattles caused by weight saving

Roger Burdett

---

18/11/19 – 05:43

Roger, when I started my driver training at NGT’s Percy Main Depot in January 1967, the oldest buses still in service were the 1954 H32/26R Weymann Orion bodied G5LW GUY Arab III’s. They were withdrawn later that year.
Mechanically, apart from only having a G5LW, they were hard to fault, but far too many corners had been cut to save weight, and the build quality of the bodies was terrible, they were known as rattle traps.
To be fair, the later Orion bodies on the 1958 Leyland PD3’s was superb, but as I said, these were terrible.
For my money, the best buses we ever had were the Alexander ‘A’ type CRG6LX Daimler Fleetlines, they had it all as far as I’m concerned.
I left P/M in 1975, and went to Armstrong Galley, the coaching division of T&W PTE, and only on rare occasions did I ever drive a bus.
In 1982, I left buses altogether, and only ride on them as a passenger, but as you say, the rattles seemed to have returned big time.

Ronnie Hoye

---

23/11/19 – 06:53

Here in Oxford the 4-cylinder Wright double-deckers (whose performance seems perfectly good despite the modest engine size) seem to suffer from sway rather than rattles. The outright winners in the rattlestakes are the awful Mercedes Citaros, with their grabby brakes, inadequate and inconvenient seating and frequent breakdowns. Admittedly the ADL 400Hs do get electrical problems, but in every other way they’re superb—but then they can boast that distinguished Dennis ancestry!

Ian Thompson