From the Tom Robinson Collection

Sheffield Corporation
1952
Leyland Titan PD2/12
Mann Egerton H30/26R

There have been many previous references to Sheffield PD2s including those bodied by Leyland, Weymann/MCW, Roe and ECW but as far as I know, the small but rare order for two buses from Mann Egerton hasn’t been mentioned. These buses enjoyed the usual thirteen year life with Sheffield prior to selling on. Tom Robinson of the Sheffield Transport Study Group comments and I quote "362 went via a Barnsley scrapman to Paton’s of Renfrew. Paton was so pleased with the bus he immediately tried to buy 361 which was at the same scrapyard. Alas it was in the course of being scrapped. In time ex 362 was cut down to single deck. The result of a fire, I think, and used as a tow wagon. They really were impressive and heavy vehicles. The saloon woodwork was especially opulent."
Keith Beeden advises that although the original contract called for H30/26R, steps were taken shortly after delivery to change this to H32/26R possibly because Roe were seating H33/25R on their deliveries at the time

Photograph and Copy contributed by John Darwent

A full list of Titan codes can be seen here.

The Roe PD2s were the first of many bodies from the Crossgate works. They were NWE 586-594 but were delivered earlier, in 1951. I suspect the reason for both bodies being higher seating capacity was that they were (Sheffield’s) earliest vehicles to 27′ rather 26′ length.
Despite many comments to the contrary, even by eminent experts, there was a standard – but not standardised – Sheffield bus. [During most of the ‘fifties it was either a Regent or Titan with either a Weymann or Roe body.] It changed with time and the demise of certain companies but a lot of the post war interest was with the "distress purchases" when, especially Weymann, could not meet demand. Occasionally the distress purchases turned out to be gems – true of these two Mann Egertons. There are two magnificent green London Transport Ts on the Rally Circuit (9.6 powered Regal III – a single deck RT) which attest to the beauty and quality of Mann Egerton’s work.
Mann Egerton were better known as the Norwich Austin dealer and they bodied many early post war Austins as small coaches, but the London Transport work did no harm to their reputation and their balance sheet.

David Oldfield

13/09/12 – 07:05

Here is a picture of 362 with Patons: www.flickr.com

Stephen Bloomfield

13/09/12 – 08:33

Very handsome vehicle, especially in that fine livery. Had no idea that Mann Egerton had ever built d/deckers. Sad that 361 was broken up after such a short life: if they were heavy then they must have been pretty robust too.

Ian Thompson

14/09/12 – 06:29

Ian, they are supposed to be the only deckers they ever built. They did get as far as building underfloor coaches as well – including a pair of AEC Regal IVs for Creamline of Bordon Hants.

Stephen. Can’t find 362 on flickr.

David Oldfield

14/09/12 – 06:32

They were certainly unusual looking, and stood out, especially with that slightly recessed panel at the front where the destination boxes were, which was unique in the fleet. But to my mind, they weren’t nearly as handsome as the OWB-registered PD2/10’s (656-667) alongside which they ran regularly on the 69 service joint with Rotherham Corporation. I seem to recall the two Mann Egerton’s sat down at the back end quite noticeably, especially when they had a good load on, but perhaps that was just a perception.
Ironically, one of the PD2/10’s, 666, was cut down to a gritter/towing vehicle by STD, just like Paton’s ended up doing with the former 362, and in its sheared off form, G56, as it became, was kept busy for many years, considerably longer than the fourteen years it served as a bus, towing all kinds of disgraced rear-engined machines back to Central Works from wherever they’d decided to expire. And it always looked quite happy doing it!

Dave Careless

14/09/12 – 06:34

A smart bus, indeed – but does anyone know why these had the sunken destination screen box? I know some pre-war and early post-war Sheffield buses had this feature, but it was by no means universal. It would be interesting to speculate that, had Mann Egerton ever tried to sell d/d’s to LT following on from their successful PS1s, then this large screen box area would be almost the same proportions as that used for the roof-box RT!

Paul Haywood

14/09/12 – 06:35

A quicker link to the ex- 362 picture Stephen.
Debateable whether the Patons livery does the bus any favours though. www.flickr.com/

John Darwent

14/09/12 – 06:37

Is it just me, or can anyone else see a distinct resemblance to Roberts bodywork (also very heavy!) sct61.org.uk/da86  ?

Peter Williamson

14/09/12 – 06:14

Apparently Glasgow Corporation FYS 494 fleet number D66 was a Daimler CVD6 with a Mann Egerton H30/26R body, new in 1951, scrapped 1960 and rebodied with an Alexander body from FYS 488 fleet number D60 which was a Daimler CD650, (10.6 litre with power steering) but chassis scrapped, not a very popular bus that one.

Spencer

14/09/12 – 06:39

Glasgow Corporation received a Mann Egerton bodied Daimler CVD6 double-decker in 1951 – D66 (FYS 494).

David Call

15/09/12 – 07:08

You’ll be hard pressed to find many of today’s featherweight Eurobuses fit to be preserved in future years and yet in the fifties the professionals were complaining about buses being too heavy. [Please compare fuel mpg of a fifties half-cab with a Euro 5 diesel.]
Why do people eulogise the Mann Egertons and their contemporary Roberts Regent IIIs – let alone their mainstream Weymann and Roe cousins? They were beautifully made, well made and looked good. The lightweight Orion and similar PRV/Roe offerings were the reaction to these heavy bodies. I ask you, what would you prefer?

The recessed destination display was, indeed, a pre-war Sheffield feature. There are echoes in the 1949/50 Cravens/Regent IIIs – featured on this site earlier this year. The most interesting manifestation was on the immediate pre-war all Leyland TD5cs, which had to have non-standard small upper deck screens to accommodate it. It was also a feature of the 1936 Cravens/TD4cs and "broke" the blue line under the upper deck windows. Weymanns managed to get the display in without either recessing the display or breaking the line.
Some post-war bodies managed to "avoid the line" in the Weymann manner but most encroached into the line surrounding the number display without breaking it. Significantly, the 1953/4 PD2/Weymanns avoided the line, like their predecessors, but the subsequent 1954 Regent III/Weymanns "encroached" in the normal post war fashion. Hours of scrutinising photographs has not yielded a satisfactory answer to the question, Why?

Dave. Couldn’t agree more. 656-667 were my favourite PD2s.

David Oldfield

15/09/12 – 07:09

In Classic Bus 110 I asked if Sheffield was the only order for M.E doubledeckers. The reply, and a follow-up in Classic Bus 112 will probably interest those who have responded above.

Les Dickinson

15/09/12 – 07:11

The reason that Sheffield ordered the two Mann Egerton bodies is quite interesting.
In November 1949 a tender was advertised for 30 double deck buses, complete chassis and bodies or chassis only or bodies only.
At the time, all the STD PD2/1’s delivered since 1947, carried Leyland bodywork. The Leyland management advised the transport committee to "look elsewhere for bodywork"
In consequence, an intended order for 30 buses to the forthcoming new regulations of 27′ x 7’6" was varied. The result was that an order for 10 NCB, 2 Roe and 2 Mann Egerton bodies were contracted.
Surprisingly, Leyland offered to supply 16 complete vehicles to the existing 26’x 7’6" PD2/1 standard. Unfortunately, NCB ceased trading, and Roe were awarded another seven bodies. The balance of the outstanding 11 (9 Roe 2 Mann Egerton) were built on the PD2/12 27’x 8′ chassis, authorised in 1950. This batch of 11 replaced 13 trams for the City to Fulwood tramway abandonment. Therefore the original 30 require was reduced to 27. Quite a complicated situation!

Keith Beeden

15/09/12 – 07:13

I understood that Newcastle Corporation also had some Daimler CW’s rebodied by Mann Egerton

Stephen Bloomfield

16/09/12 – 06:50

So, Keith, Leyland were anticipating pulling out of coach-building that early and at the same time were already showing signs of their later take it or leave it attitude. Thanks for the insight.

David Oldfield

16/09/12 – 06:52

Stephen
You may or may not remember me from our time together at BCT, but that’s another story.

Newcastle Corporation had a batch of 5 Daimler CWA6 vehicles delivered between 1945-47 that received new Mann Egerton bodies in October 1950. They had been delivered new with second-hand bodies transferred from 1931 vehicles.

Kevin Hey

14/12/12 – 16:17

It is true that Newcastle had Mann Egerton Deckers , there were I believe three on Daimler chassis, possibly rebodies of chassis that had originally been fitted with pre war Metro Cammel bodies taken from scrapped earlier chassis, and also Glasgow had one Mann Egerton bodied Daimler, D66 I believe

Mr Anon

05/07/14 – 17:34

Mr Anon, Newcastle had 5 Mann Egerton bodied Daimlers, they were fleet numbers 1 to 5, JVK 421 to 425.

Peter Stobart