Old Bus Photos

London Transport – Daimler CWA6 – GXE 578 – D 1

London Transport - Daimler CWA6 - GXE 578 - D1

LPTB D-Class (D1-6) June 1944 - Lower Interior Lower deck facing forward

LPTB D-Class (D1-6) June 1944 - Upper Interior Upper deck facing rearward

LPTB_D1_Rear_1944_rt

London Transport
1944
Daimler CWA6
Duple L27/26R

Daimler CWA6’s D1 to D6 were delivered to Merton Garage in April-May 1944. They had Duple lowbridge bodies which supplemented the austerity STL bodies which had been fitted onto spare STL chassis in 1942/43. There was still a shortage for the 127 route (Merton-South Wimbledon) hence the delivery of the Daimlers. They displaced some lowbridge ST’s from Watford and other lowbridge buses from Godstone which somehow had kept the service going. These, together with D’s 128-131 delivered in late 1945, plodded the same semi-circular 9 mile furrow to termini only 2 miles from each other!  Sometimes, for a treat, they’d be allowed out on the long haul from Morden Station to Epsom for the races (a riding treat for me, too) and sometimes to historic Hampton Court on route 152. They all ended their short lives at the end of 1952, some going to Ceylon, along with some of their big brothers!.
The photographs show front/back views and interior views. The lowbridge layout was conventional for the period, with rows of four seats, without staggering, and an offside sunken gangway, which intruded slightly into the driver’s cab.
I mentioned a while ago the highly-varnished wooden slated seats and the tendency for upstairs passengers to suffer from ‘lateral instability’ around corners! Upholstered seats did not come until around 1948/49, from memory. The position of the rear number plate was unusual on these vehicles, for many austerity buses had them fitted above the window on the nearside rear bulkhead (above the used ticket box), making them invisible from the street! LT soon put them by the offside rear lights as per usual.
It is nice to see photos of one of them in virgin condition, unspoiled by adverts, particularly on the rear upper panel.
My thanks to London Transport Museum for the use of the above shots.

A full list of Daimler codes can be seen here.

Bus tickets issued by this operator can be viewed here.

Photograph and Copy contributed by Chris Hebbron


Thank you Chris for a most interesting account of this particular batch of "utility" vehicles. Dreadful though WW2 undeniably was, it necessitated the design and construction of some most characterful buses, many variations of which I was privileged to travel and to work on. These included Daimler CWA6/CWD6, Guy Arab and Bristol K6A – with bodies by Duple, Roe, Park Royal, Pickering to name but a few. Despite the poor materials which blighted many of these vehicles they performed a heroic service, many having long and distinguished careers even into the 1960s. My close associates often sigh, good naturedly I think and hope, at my hero worship of these historic buses – especially the one hundred "Sutton HGFs" D182 – 281, even though they were to relaxed specification and were delivered in 1946 they were still commendable and fascinating "utilities" as far as I’m concerned.

Chris Youhill


I agree, Chris, that the vehicles had character and even simplicity, plainness if you like, has a certain attractiveness, if you understand my meaning. What always amazed me was, that in the situation of total war, each body builder was permitted to design its own style within the ‘utility’ specification laid down. Fascinating from a bus enthusiast’s point of view, but a wasteful duplication of manpower! As for the Sutton Daimlers, the one aesthetic let-down was the rear three-piece destination display, which looked as if it had been a last-minute pop-riveted afterthought and in perpetual risk of falling off! It probably was, and was!
A further look at D1’s lean-back, but ramrod straight front, above, makes me recall the frontal look of the very rare 1932 Birch body. I have seen a photo of one somewhere and will try to find and upload it.

Chris Hebbron


As you rightly say, Chris, the variations in designs within the "utility" specification were fascinating. The first two Duples that we had at Samuel Ledgard’s, also in 1944, were the exact highbridge equivalent of D1. I think that the slightly later Duple bodies were possibly the most handsome and smoothest of line of the real "utilities", and surely the Pickering offering from the North East must have been the most ghastly in appearance and poor construction. I quite agree that the ludicrous rear destination assembly on the 1946 "HGFs" was unforgiveable – and all to inform would be passengers in great detail which bus they had missed!! In all twenty two of the Ledgard vehicles these abominations were removed and immaculately panelled over before entering service. Seven of the batch were also fitted with platform doors and emergency exits of the most professional appearance. Stop me now before I go on for pages about a most intriguing series of buses !!

Chris Youhill


I suppose these are tram seats, but trams don’t roll! The question is indeed "why bother?" when there is a limit to what you can save. The interiors are still lined: but there are no headlamps & only one (two?) drain out of the upper deck needing a moulding to keep the contents off the platform: & it is fixed together a bit like a Leyland National (! for the same reasons?)- fair enough but not shattering: I suppose then it was a departure from traditional coach building….. but two questions: what is in the windows & is that just a void round the radiator? You presumably didn’t need to follow the old custom of leaving the engine access open in hot weather! I have never seen an "original" utility bus, so these photos are helpful.

Joe


Hi Joe. It’s true that wooden latted seats were widely used on trams, but I guess their construction was cheaper, simpler and lent itself more to mass production than upholstered seats. I can certainly remember them on utility trolleybuses of Nottingham City Transport. Same goes for the rear dome construction which was produced from flat metal sections, so that formation of complex curves was not necessary. Many of the features were intended to reduce the production man-hours needed as well as the costs. Actually the bus does have headlights, but they are small and fitted with blackout cowels giving only a very feeble light beam ahead. You will notice that the interior lights are also dimmed with a blue cover. The windows (in London at least) were encased in a close weave netting to prevent splintering in case of bomb blasts nearby. This let the light in but made the windows opaque – hence the small diamonds of clear glass in the centre. The use of white handrails (also white tips to the mudguards and probably the white spot on the rear) were intended as an aid to sight during the blackout.

Stephen Ford


The slatted seats were new, made for these buses., but upstairs tram seats could be wooden, but were constructed to have reversible backs.
Trams DO roll, Joe, or, in fact, corkscrew, especially if they ran only on four wheels and not trucks (on trains called bogies). The action was very strange and conducive to small children throwing up!
It is not clear from the photos, but the design of austerity bus bodies ensured that they could be built with unskilled labour. The bodywork had no curves worth mentioning, obviating panel-beating (look at the rear of the roof, called lobster–style which was flat steel cut then curved round at the end and just welded). They only had single skins (so you could see the body ribs inside, and only single-skin roofs (sometimes the ribs were inside, sometimes outside), but, worst of all, they were generally built with steel sheeting and unseasoned wood of uncertain origin (ash was the usual pre-war wood used) ensuring rust problems and the wood framing literally turning to dust after around seven years. Even then, some bodybuilders had their pride and rejected some of the totally unsuitable wood they were given to work with! London Transport started a programme of re-building the bodies around 1948/9 and gave up halfway through, because of the time and expense. Although hard to see, the bus does have headlights, very tiny and black painted (the offside one is below the cab vent). There is no void around the radiator, there was a chicken-style wire grill inside the steel radiator framework. The engine had the usual side cover, which was usually in proper position on these buses and not leaning on the wing! The Daimler chassis were simplified versions of the pre-war model, but were quite robust and sophisticated. Most utility buses of the era had chassis which long outlasted the bodies. They went on until rendered obsolete more because of their out dated halfcab style and ponderous road performance in the 1960’s than for mechanical shortcomings. In their day, despite steel being used rather than aluminium, the stripped-out bodywork was usually the same weight as pre-war buses. From the above photos, you’ll see that the only touch of luxury was the patterned material covering the front downstairs bulkhead!
Finally, you mention the windows and I assume you mean the diamond shapes. This was anti-blast netting attached to the inside of the non-opening windows and lower glass of the few opening ones – two each deck! The diamond section allowed passengers to see out. The netting was not not universal throughout the UK – much depending on the risk of bombing where the bus operated.

Chris Hebbron


The white spot on the rear, Stephen, is an interesting point. It seemed unique to London Transport and I’ve seen it mentioned that it was an aid to trolleybus drivers in that they knew they could overtake a bus with a spot: to do so on one without was to court disaster!! There’s a logic to this theory, but whether it’s true……!

Chris Hebbron


The "trolleybus assistance" theory is an interesting one Chris, and feasible too, but I think that the more likely answer is that the white spots were a general aid to visibility in the WW2 blackout. I’ve had a quick look at the prewar "STLs" and there isn’t a white spot to be seen when they were nearly new, but plenty in the chapter about the War period.

Chris Youhill


I think Chris Youhill is right about the spot – but I arrived over seven years after VE and VJ days, so what do I know?

David Oldfield


Duple really were a class act weren’t they? Even with the constraints of the utility specification they managed to make them look refined in an un-fussy "Puritanical" sort of way. Even the lobster-back canopy is tidily done. And not many manufacturers bothered to put radiused windows in the rear emergency door. This really softens what might otherwise be a rather savage design. The Barton’s specimens I used to ride on were similar, but must have come a bit later, since they had upholstered seats and "peacetime" rear canopies – although of course, Barton’s did have a penchant for rebuilding, modifying and generally tinkering with their rolling stock!

Stephen Ford


London Transport never actually ordered any Duple bodies for their chassis (most, pre-war, were built by them at Chiswick, anyway). But they had inherited 50 Duple-bodied Green Line coaches from LGOC, so had some experience and Duple was third on their preferred list of body suppliers in the war, maybe because they were a London company (Park Royal, I suspect, was first)! They had a good reputation, pre-war, too. When they required another three lowbridge Daimlers for the same 127 route above, delivered in November 1945, they’d managed to wangle Duple to be the bodybuilders again, even though Massey were the only firm making such bodies by then! Apart from the aforesaid 7 D’s, there were a further 104 highbridge ones, 20 B’s (Bristols) and a solitary G (Guy)!
As an aside, Chris Youhill commented on the ugliness and flimsiness of Pickering austerity bodies – has anyone got a photo of one of them they could upload, assuming the bodies lasted long enough for a photo opportunity!

Chris Hebbron


DaimlercloseupThanks for all the feedback. I’ve found the headlamps and realised that the top deck ceiling is the roof (like Midland Red?): the white circle is clearly the thing to aim your single ( ie dipped) headlamp at in the smog: and smog it would have been upstairs with one side window….. but I’m still baffled why the body doesn’t touch the radiator (?): and was the Leyland National the natural heir of this construction system?

Joe


JUA 763_lr

In reply to Chris Hebbron’s latest message, could you please if possible include this picture of Samuel Ledgard Otley depot Pickering bodied JUA 763. Its a good illustration of how ghastly, inexcusable even under the Fheurer’s tyranny, the Pickering offerings were.

Chris Youhill


The discussion about wooden seats was interesting. I believe that Aberdare Corporation until quite modern times specified wooden seats because they carried a lot of coal miners who would have probably soiled moquette seating. Also the now defunct operator Jolly of South Hylton in County Durham had a batch of bus bodied Duple Dominants and they had a rear wooden seat to counteract vandalism.

Philip Carlton


Daimler RadI can answer the Daimler radiator mystery, Joe. As with many buses with radiators, the gap between radiator and body was filled by some sort of rubber composite material to keep damp and dirt out. When the D’s were re-painted and overhauled, the radiators and seals were changed from black to red, as my photo demonstrates. One oddity about this photo is that it is the only D I’ve ever seen with mansized headlamps and looking the better for it!.

Chris Hebbron


Thanks, Chris, for letting me and others see the Pickering offering. The product could have done little to lift morale and possibly even lowered it! Mind you, I’ve seen photos of the enemy’s efforts with Berlin’s double deckers in the inter-war years and they weren’t far removed from the style of the Karrier CL6 body I published here some months ago!
I assume the Ledgard bus is a Guy Arab II, but it certainly hasn’t got Guy’s extended front wings, certainly not the nearside one, anyway. Intriguing.

Chris Hebbron


I know what you mean about the Pickering, but I guess in the war beggars couldn’t be choosers. And, as a colleague used to say, when you’re tired after work a third class ride beats a first class walk any day! For much of the duration the last buses in many cities ran at 9.00 (to save fuel and maybe let crews get home before the bombs started falling in earnest). Late workers in essential industries had passes allowing them to jump the (long) queues which didn’t stand a chance of all fitting on these last buses.

Stephen Ford


Not heard that saying before, Stephen, but my son used to say (in relation to the crude but successful Russian T34 tank in WWII) ‘Quantity has a quality of its own" which equally applies to these wartime saviours and stalwarts. And it the dark days of the war, 1942-43, there was an edict to save a further 25% on fuel and tyres. This is when bus companies ran buses into cities in the morning rush-hour, where they remained parked until returning to the suburbs in the evening. Drivers and conductors took the remaining buses home, then taking up duty again for the return journey. In London, there were rows and rows of them all over Central London, even in the Royal Parks.

Chris Hebbron


Chris H is quite right in assuming that the Guy JUA 763 was an Arab 11 and its missing outswept mudguard – from time to time – was a source of mystery. Of course we could have asked at the time I suppose but didn’t. Incredibly however the elusive elegant fitting suddenly appeared years later on ex United Bristol K GHN 840 – which made that vehicle look as odd so equipped as the Guy did having lost it !!

Chris Youhill


Thanks for the radiator pic, Chris- yes I now see the shrouding on the original: examples I have seen in the early 60’s were leather & looked very naff. The cleaned up painted version is very smart & neat- notice too the neat bracket added for the jumbo headlamp. What does the badge say? LT?

Joe


Chris Y – Thx for the ‘wing’ story – it’s amazing what engineers put away for a rainy day, just in case! And, in connexion with Pickering’s unattractiveness, I always felt that LT’s least attractive recipient was the Massey version. BTW – Where was Pickering’s factory?

Joe – The badge said ‘London Transport’ and was never that secure on these radiators, which weren’t designed to take anything; a fluted radiator top was considered enough for Daimler cars and buses! Interestingly, I notice that D1 above has not yet been fitted with the plate. I suspect it is still at Chiswick, where it would have been delivered to. The Green Line D’s never bore them and the Guys seemed to be 50/50. Amazing that time was wasted on such frills in a time of National Emergency!

Chris Hebbron


How fascinating to read about D1-6.
They seem identical to the Bradford ones which I remember well, including the Upper Deck "lateral instability". The photo brings it all back!!
In Bradford, these buses were regarded with total disrespect, being nicknamed "pig troughs" or "Flat Harriets", but they always appealed to me, being a utility admirer.
Duple bodies were probably amongst the best, as far as I can see, and were probably helped by the "V" strip against the canopy on the n/s. There was something very distinctive about the "shell back" dome which worked with, rather than against the overall look of the body, and , when "normal" domes reappeared in 1945, the body lost some of its appeal for me. Duple utility bodies could keep me going for hours. I also well remember the Ledgard ones, although memories of the HGFs seem to predominate there!

John Whitaker


Chris H – I believe the Pickering factory was at Wishaw in Scotland and will check as soon as I have chance.

Chris Youhill


Pretty sure the Pickering factory was at Wishaw. Tram literature quotes Wishaw as the place where Pickering built the Aberdeen streamliners

John Whitaker


Yes, I’m sure that the Pickering factory was in Wishaw, Lanarkshire in Scotland, from what I’ve heard and read over the years.
The Ministry of War Transport (I think that’s the correct title) was responsible for allocating both chassis and body builders to operator’s applications for new buses. The intention was that Pickerings would deliver their products to operators in Scotland and northern England. Apparently one Midlands municpallity (was it Derby?) had heard that Pickering bodies were "fragile" and refused them. As a result two Pickering-bodied Guy Arabs ended up with Brighton Hove & District on the south coast! As non-standard to that fleet, they were sold or transferred after the war (c.1948?) to Western / Southern National, where I think they operated out of Plymouth for a few years.
I believe most of Pickerings bus work pre-war went to Glasgow Corporation, and I have a vague memory that their main occupation was as a builder of railway wagons. Were they more successful in that role than in bus work?

Michael Hampton


The question about the white disc on the back of vehicles is mentioned in "London Transport in the Blitz" by Michael H C Baker. I understand that motor buses had the disc painted on the rear panel but trolleybuses were distinguished by carrying LT’s trolleybus bulls eye motif there (which was the standard bar and circle device superimposed with a ‘T’ and with the word "Trolleybus" on the bar). In later years the trolleybus motif was moved to the rear window to permit the rear panel to be used for advertising.

Trevor Haynes


Thanks for your comment, Michael. What Michael Baker wrote is my understanding of the situation. I’ve never heard of or read the book, incidentally, but must try and get a copy now! The ‘T’ motif was not a war characteristic, unlike the white disc Strangely, however, overhauled buses were still leaving Chiswick with the disc painted, for some months after VE Day.

Chris Hebbron


22/10/11 – 17:36

I’ve just found your website/blog/W.H.Y. and of course find it fascinating. Some of you chaps have great depth of knowledge – and these forums can only increase it, I guess!
I have a few pics taken as a spotterlad and if I can find a way to do it, I’ll attach a shot of ex-L.T. D74 working in Leicestershire for Brown’s Blue of Markfield, which firm I believe ferried coal miners of the region to their daily toil. BB had as I recall, D 19, 161, 165, 169, 179 and 74 and may have had at least one ex-East Kent Daimler, too.
OK now I’ve found the advice on how to forward photos, so I’ll get on with it!

Victor Brumby


24/10/11 – 17:39

When my interest in `Bus Spotting` started, in the early 1950’s, our local service was route 151 that included Morden Station and Reynolds Close, Hackbridge. My lasting memory is the service used D models. At our local stop (we called it The Circle at Carshalton) we did however prefer to wait for the new RT to return from Reynolds Close to ride on the newer bus to Morden. In what I have read recently it seems the D’s did not run route 151 as my aging memory thinks. Is it possible the D’s were only `loaned` to route 151 at times? If not, can anyone tell me what type of bus was on route 151 before RT’s took over?

Derek Hanlon


25/10/11 – 07:14

Your memory is not at fault, Derek. The original 151 route started in 1949, running from Morden Stn to Hackbridge. Vehicles were supplied solely from Sutton Garage, which, at this time, had an entire allocation of 100 ‘relaxed’ style D’s in the D182-281 series. The last of the D’s went in 1954, replaced by RT’s.
I lived in Morden until 1956 and only recall D’s on the route, although I remember seeing earlier D’s on there once or twice, presumably on loan from nearby Merton Garage.

Chris Hebbron


26/10/11 – 05:44

Thanks for that Chris. Its nice to have confirmation that the old memory still works. Having now found your (extremely good and worthwhile) site I expect I shall have a few more requests sometime. Thanks.

Derek Hanlon


01/08/13 – 06:46

I have only recently found this site and have Noticed that two of the people who use the site Chris Hebbron and Chris Youhill remember the Daimlers from Sutton and Merton Garages. Before I went into the R.A.F. in 1953 I was a Garage Youth at Sutton garage, basically a Junior Mechanic. At the time we not only had the Daimlers but also the single deck A.E.C Renown buses known as Scooters. On Saturdays we borrowed single deck vehicles from other garages, one of which was Sidcup to supplement our service 213 to Kingston. The Scooters were replaced by the R.F. Although we boys were not allowed to drive round the garage we were often asked by the mechanics to move buses, so we did and to get different types such as Qs and 10t10s was a bonus. Like other contributors I loved the Daimlers and disappointed that most went to Ceylon and none were preserved. With regards to the route 151. I later drove from Merton Garage and the 151 was one of my regular routes, but with an R.T. It is correct that Sutton, in the 1950s did run that route. I hope this is of some interest.

Brian Blackburn


LPTB_D1_Front_1944_rt Vehicle reminder shot for this posting


31/01/14 – 13:10

The white spot controversy!

LPTB_D1_Rear_1944_rt

Definitely only motor buses carried it, both double deck and single deck. The theory about trolleybus drivers being able to understand that they could overtake a white spot motor bus is reinforced by the fact that the Trolleybus symbol was moved from the lower rear panel to the rear lower saloon window during the war (not afterwards) from its previous position. This had nothing to do with lower panel advertising as suggested, as pre-war the symbol was very low down on the left and there was plenty of room for advertising above it and many trolleys had such advertising pre war. The adverts that were missing pre war on trolleys were those either side of the destination blinds between decks but why this was so seems to be a complete mystery as they were fitted post war with no problem.

Gordon Mackley


 

Quick links to the  -  Comments Page  -  Contact Page  -  Home Page

 


 

Huddersfield Corporation – Daimler CVG6 – DCX 114B – 114

Huddersfield Corporation 114 Daimler CVG6 front view Huddersfield Corporation 114 Daimler CVG6 rear view

Huddersfield Corporation
1964
Daimler CVG6-LX30
Roe H39/31F

This particular vehicle has appeared on this site before, but a comment came in from Stephen Ford requesting any rear or internal shots. So I thought I would oblige, no internal shot I’m afraid but it’s not a bad rear end. I notice on this particular vehicle there is no destination blinds at the rear I do not think it was as easy to have them on front entrance vehicles. I know they had rear destination blinds on the rear entrance Regent IIIs I used for school, the number of times I saw the 63 tootling merrily up the road resulting in me having a one mile walk home or wait an hour for the next one.
If you have any rear or internal shots please feel free to contribute them to the site for everyone else to see.


This bus ..114 was a Huddersfield Joint Omnibus Committee bus it was never fitted with rear number blinds … the Joint omnibus committee vehicles at the time were allowed to carry adverts .. and the space was available for advertisers .
The similar buses that were owned purely by the Corporation had rear number blinds fitted up until 1966.
The Corporation at the time did not allow any advertisements on the outside of its vehicles.

Colin


In my West Yorkshire gallery this difference is illustrated by a couple of consecutive rear end photos of (3202 and 3203) in the Holme Valley collection. See here

David Beilby


Interesting shots of the Roe rear ends David. I note that the lower rear panels from the axle back have been shortened to prevent them ‘grounding’ when negotiating junctions at the bottom of very steep hills. Bradford C T carried out this modification to the rear overhang of many of its MCW-bodied AEC Regent Vs for the same reason, with the rear chassis extensions being similarly visible. On the subject of rear ends, does anyone else wonder why some coachbuilders fitted (and some operators specified) such dated features as split upper deck emergency windows, on what were otherwise quite modern-looking front entrance buses? Even the ‘balloon roof’ Alexander bodies mounted on Atlantean and Fleetline chassis could be had with them, despite having very modern curved screens on both decks at the front!

Brendan Smith


 

Quick links to the  -  Comments Page  -  Contact Page  -  Home Page

 


 

Manchester Corporation – Daimler CVG6 – NNB 231 – 4421

Manchester Corporation - Daimler CVG6 - NNB 231 - 4421
Photograph by ‘unknown’ if you took this photo please go to the copyright page.

Manchester Corporation
1954
Daimler CVG6
Metro Cammell H32/28R

In 1965 Manchester had 398 Daimler CVs all rear entrance. Out of the 398 158 of them had the 7·0 litre 5 cylinder Gardner 5LW diesel engine the rest having the more powerful 8·4 litres, six cylinder Gardner 6LW. They also had one CLG5 registration PND 490 fleet number 4490 which was delivered in 1955 it must of been one of the last of the CL models as production ceased in 1955. The CL was a lightweight version of the CV it was in fact 10cwt lighter but most of its weight saving features were either available or incorporated into the CV so in 1955 it was the end of the CL. The last five in the last batch of front engined Daimlers delivered to Manchester were CCG6s the middle C stood for the Constant mesh gearbox that was fitted, this made a total of 404 it would of been 405 but for some reason GVR 336 – 4034 had been withdrawn, any one know the reason why? Along with the Daimler CVs Manchester also had 160 Crossley DD42s and 570 Leyland Titans all of which were rear entrance vehicles, But at the same time rear engined front entrance Atlanteans and Fleetlines were being bought in large quantities, so the switch to front entrance vehicles did not involve a front engined vehicle. I thought that was a little strange. So I checked out Liverpool corporation they also switched the same way, though they did have one front entrance Regent V which was classed as experimental. On checking Leeds City Transport I think they also only had five front entrance front engined vehicles Daimler CVG6LX-30s which it would appear were bought for one specific route anyway. So the switch from front engined rear entrance to rear engined front entrance double deckers does not appear to be that strange after all, it may have something to do with the size of the fleet!!!


In 1971 I went up to music college and CVG6s, like the one in the picture, were still very much around. They trundled around the flat-lands of South Manchester and the Cheshire plain with no problem, despite their age – particularly on the 44 to Ringway Airport (Manchester International now) and 46 to Styall (just short of Wilmslow).
They were not as sprightly as the PD2s, nor especially the North Western Renowns, which charged down the Wilmslow Road and Palatine Road. I read recently somewhere that, despite their manual boxes, many drivers preferred the PD2s.
The CCG6s were "foisted" on both Manchester and Salford Corporations in equal small numbers. They had the Guy "crash" box (at a time when Daimler and Guy had been brought together under Jaguar ownership) and were hated as much as the Leylands were revered. They were, however, offered at a knock-down price to sweeten the pill. [Pity, because they had the musical quality beloved of enthusiasts on contemporary Guy Arabs.]
I cannot remember whether it was here on this site, or elsewhere, that I recently read that putting a forward entrance on a front engined chassis caused an unforeseen weakness in body structure not evident with the entrance behind the rear axle. The Liverpool bus mentioned about was part of their experimental fleet and Sheffield had only around 30 forward entrance vehicles. I seem to think the Leeds buses were for the 72 and one of them survives in preservation.
Engineers actually knew what they were talking about and they would talk to each other. Often gricers only find out with the benefit of historical hindsight. [It took nearly fifteen years for Leyland to get the Atlantean right with the AN68! That was probably another, better reason, to stick with the "old".]

David Oldfield


The five Leeds forward entrance Daimlers were originally intended for and were employed on the 72 service to Bradford, jointly operated with the latter Corporation, where they were of a similar layout to the blue vehicles on the route. When Bradford went "rear engined" the Leeds buses were firstly used on the services to Garforth, Kippax and Ledston Luck which had been taken over from Kippax and District (Wallace Arnold). Later the Leeds five saw more general use, although predominantly on the services from Moortown and Meanwood via City to Morley. Immediately after the formation of the WYPTE all five were transferred to Huddersfield (Kirklees) where they "fitted in better" and I took a picture of one in Longroyd Bridge Depot boasting the idyllic destination "Salendine Nook." One of the five is indeed in preservation but I believe not yet fully restored.

Chris Youhill


The 5 Leeds front entrance Daimlers were CVG6LX-30 models and were bought for the joint 72 Leeds Bradford service, Bradford were using AEC Regent Vs with MCW bodywork at that time. The Leeds buses were later used on the Garforth services. Following the advent of the PTE they moved to Huddersfield

Chris Hough


Chris Youhill is normally reliable in everything he says, so maybe there are two! The Leeds Daimler I refer to was, until recently, running – resplendent in Huddesfield livery – in Steve Morris’s preserved fleet at Quantock Motor Service. [I drove for last year’s Minehead event where it performed all day.] I think it is one of those which was up for sale because of his downsizing.

David Oldfield


Although Manchester 4490 was often described as a CLG5, later wisdom has it that this was a model that never actually went into production. Either one or two prototypes were completed (in Alan Townsin’s book on post-war Daimlers, ‘The Best of British Buses No 11’, the text appears to conflict with the photograph captions on this point), but operators were not happy to accept all of the features. As a result, a number of experimental lightweight CVs were built with some but not all of the features of the CL prototypes, and it appears than 4490 was one of these.

Peter Williamson


Thank you indeed to David Oldfield for that most welcome piece of news, as I’m almost certain that the "Steve Morris" one of which I was unaware is not the one I mean. The one that I mentioned has fairly recently been acquired by a Leeds preservationist (a friend of mine who I see very little lately) but I’m pretty certain it had been a playbus fairly near here. I shall ring him at a civilised hour in the morning and find out for sure. So all being well this will be a rise from 20% to 40% in the members of this interesting batch still around. It is to my lasting regret that I was done out of a drive in one of these by a "photo finish." I was spare one day at the LCT central Leeds Sovereign Street Depot (5 minutes walk from town) and the Inspector told me to go quickly to the Corn Exchange where a bus for Morley was waiting with a full load as the relief driver had not turned up. It was "one of the famous five" and I was thrilled, but I was beaten to the cab door by a short head when the absentee turned up. I was just formulating a plan to offer him £10 to disappear for a few minutes when he set off leaving me in the middle of the road like a lemon. So I never did have a drive in a front entrance CVG6LX. Oh, I did once move one around the City centre, empty, when it was out of service for a staff shortage, but that’s not quite the same thing as a live service journey is it ??

Chris Youhill

A follow on from Chris

Excellent news this morning – two of the famous five are still with us !! The one my friend owned – 574 – was sold by him some time ago to a work colleague who was eventually unable to complete it. It is now safe in the hands of the excellent Aire Valley Group at Keighley, who will no doubt fully restore it to a very high standard. The one in Huddersfiled livery – 572 – has indeed been offered for sale and we don’t know yet where it is but presumably it will remain pristine and active in a new owner’s care.
This batch statistic must surely give a whole new meaning to the term "proportional representation.

Chris Youhill


Glad to bring the tidings and that there are now two!

David Oldfield


I read with interest the comments about 5 cyl Daimlers on Princess Pkwy from Northenden (Sharston) Depot and the fact that 5 cyls were not used on the road for all day services due to their lack of power.
This is strange as the post war batch of Damilers (4000-99) many of which were included in the Northenden allocation and 4510-4549 (many of which were included in Northenden) were used in all day service for many years.
Indeed the 45xx were mainly used on the Limited Stop services such as the 101 and 103 and I remember how drivers would throw them round the roundabout at Wythenshawe Road, the buses leaning over at quite an angle.
That these 5 cyl buses were short on power is not in doubt. The performance of the early post war batch was very poor but then the Leyland PD1 was also not a very good performer with its 7.4 litre engine.
However fuel consumption on such buses was rather better than that of modern buses!

Malcolm Crowe


While puzzling over the reluctance of certain operators to adopt front entrance bodywork on halfcabs, what about the strange reluctance in Manchester to adopt 30ft halfcabs? Leeds, Bradford, Huddersfield and Halifax all adopted them very quickly, London had its ugly "cut & shut" RML Routemasters, but Manchester, along with Ashton, SHMD and Stockport stuck with the 27ft length to the end (apart from Stockport’s very last batch) even though others in the conurbation experimented with bigger buses. Hasn’t it always seemed odd that Manchester went so quickly from being a city of small buses to one infested with the vast Mancunians?

David Jones


The change from ancient to modern isn’t quite that surprising since it coincided with the arrival of Ralph Bennett from Bolton and a new boss will always make his/her mark on an organisation.
As for PD2/PD3. I have never been an operator, but I once read that the PD3 was never considered to be quite up to PD2 standard. [Could have been power to weight ratio or the strain of extending drive gear a further 3′.] PD2s were always regarded as a quality product and in theory the only difference with the PD3 was the length. PD2s in Manchester were highly regarded by everyone and were more than man enough for the job in hilly North Manchester. In mountainous Sheffield, PD3s could make heavy work of the job!

David Oldfield


Halifax may have adopted the thirty-foot PD3 very quickly, but notably they reverted to the shorter PD2 for many later deliveries. Having seen some of the termini it is not entirely surprising, but the number of PD2s bought later is more than would be warranted for this reason. I suspect performance on gradients also had something to do with it, there are certainly plenty of those in Halifax!
Although it’s hard now to think of them that way, 30 foot long buses were once bigger than normal and the extra length of such buses would have caused problems in busy termini such as Manchester Piccadilly if there had been large numbers in the fleet. Obviously that issue was eventually addressed but looking at the current congestion in Piccadilly Gardens is it easy to see how critical this issue can be.

David Beilby


Unlike many operators, Manchester specified maximum capacity (65) for its 27-footers, and could only have got another 8 in a 30-footer. You then have to consider industrial relations, which weren’t easy in Manchester and were negotiated on a garage-by-garage basis. Conductors would have either objected to the extra work or wanted more money, so it probably wasn’t worth the hassle.
Eventually 10 Atlanteans were purchased, with 12 extra seats and the advantage of the driver looking after the platform. Even these sat around for ages while the management and the Northenden union did battle (Northenden had the most difficult union and was chosen deliberately, on the basis that once that nut was cracked, the rest would follow more easily).
I would also make the point that by the time Ralph Bennett arrived in 1965, Manchester had already abandoned half cabs and been buying Fleetlines steadily for 3 years. All subsequent deckers were 30 feet long (including the first Mancunians) until the very end of 1968 when the first 33-footers arrived.

Peter Williamson


I was a driver in the mid-late 60’s (Birchfields road) and remember seeing a photograph of a double decker standing on eggs. Does anybody have a copy of this? At that time, there was an ‘old bus restoration’ shop in one of the disused entrances.

Peter Dorricott


04/10/11 – 17:17

It’s not strictly true that only Stockport’s last batch were PD3’s. In fact all new double deck vehicles after 1967 were PD3’s which gave a total of 27 in all. There’s a school of thought that the Transport Dept only ordered these because PD2’s were no longer available. The PD3’s did not handle as well as the PD2’s, the steering was exceptionally heavy whilst the performance was no great shakes on Stockport’s hills.

Chris Flynn


04/10/11 – 21:11

Re the debate about front entrance half cabs. I always think that it was peculiar that Grimsby- Cleethorpes specified hinged cab doors on their Daimler CVG/Roe and on the AEC Regent Vs/Roe when the general norm was for sliding doors. Surely with the latter buses could be parked up closer together.

Philip Carlton


06/10/11 – 07:25

It cannot be true that Stockport only ordered PD3s because the PD2 was no longer available – unless Leyland planned to withdraw the PD2 and then changed its mind. According to //www.buslistsontheweb.co.uk/  the last PD2s were delivered to Darwen in April 1969, two months after Stockport received its final PD3s.

Peter Williamson


01/11/11 – 06:40

Manchester Corporation Daimler CVG5 No 4034 referred to above in original text was irreparably damaged following a collision with a lorry in 1951.
Lorry emerged from Raby Street and knocked the bus over.
(Info extracted from "The Manchester Bus" by Michael Eyre & Chris Heaps)

Andrew Scholes


12/04/12 – 06:13

I was a conductor, then driver from 1959 to 1978 at Birchfields Rd. Depot. I well remember some of the ‘workings out’ we got on Circular (53 Cheetham Hill to Brooks’s Bar/Old Trafford) especially if we had a Princess Rd. Daimler in front! I remember too the ‘crash box’ Daimlers, which were ok to drive on the quiet routes, 85, Chorlton/Albert Sq., or the 20, Chorlton St./Woodford. But they were no match for other Daimlers, and particularly Leylands in the fleet. 3550, although well worn, was a favourite! I particularly enjoyed driving the few 3400’s we had at Birch.
I read with interest, Peter Dorricot’s question re the Double Decker standing on eggs. Sorry I can’t offer any info on that, but I do remember the name.
Unfortunately, so many years on, I cannot put a face to the name.
Those were good days behind the wheel with a conductor, not so great as one man operation took over. But that was progress – I suppose!

Bill Parkinson


28/09/12 – 07:56

The 4400 batch of CVG6s were unique to Manchester. The body was a stopgap between the MCW Phoenix, of which both Manchester and Salford had large batches and were very long lived, and the Orion.
The close co-operation between MCTD and MCW led to yet another long lived batch. Delivered from Nov 1953 to July 1954 they survived well into SELNEC days, at least one receiving SELNEC livery, most attaining 19-20 years and many being in all day service all their lives.
At least one example inherited a complete rear axle from one of the previous Phoenix bodied Daimlers and the batch had the "distinction" of having one of its number selected as the trial bus for the spray booth scheme which eliminated the cream surrounds of the upper deck windows.

Phil Blinkhorn


29/09/12 – 07:34

To pick up David Beilby’s comment on the Halifax PD2 versus PD3 question, it is true that the later Halifax Titans were all PD2s. The restricted terminal working arrangements at some of the outer destinations was only part of the story. As a Traffic Clerk in Halifax in the mid 1960s, I regularly covered the second half of late turns on the road, and my preference was for the 48/49 Brighouse – Hebden Bridge routes, which were the regular haunt of the 30 footers, PD3 and Regent V. The PD3 was certainly less lively than its shorter stablemate, though the very low first gear would eventually get it up even the stiffest Halifax gradient. I can state from personal experience that the serious shortcoming of the PD3 was its distressing reluctance to stop – it would seem that the braking system was identical to that of the lighter PD2. The synchromesh Regent V (in my view, a pretty unsophisticated piece of machinery – sorry David O), whilst less than ideal in the braking department, was decidedly more reassuring when it came to stopping the thing. The first double deck bus in my experience that had really decent brakes was the Dennis Loline.

Roger Cox


29/09/12 – 12:39

So? The syncro Regent was an unsophisticated machine – especially by today’s standards – but it didn’t make it a bad bus, and AEC brakes were always better than Leylands.

David Oldfield


29/09/12 – 12:39

I was interested to read Roger Cox’s comments about the Halifax’s PD3’s brakes versus the PD2’s. I too worked as a Traffic Clerk at Halifax – though in the early 1970’s – and like him I regularly worked the second half of late turns driving in the evenings, and nearly all day on Saturdays. The 48/49 had been split up into separate routes and converted to OMO just before I started, and since I only did Crew Driving at the time I rarely covered those sections, but worked fairly randomly on all the crew routes. Later I transferred to Driver and have done that until the present time – although now only part-time in semi-retirement. So I drove them on a regular basis until the last one was withdrawn.
I must say that although the PD3’s naturally felt a bit heavier to drive than the PD2’s and were a bit harder work to get going, I never really found their brakes to be any less adequate. However, when WYPTE took over we soon afterwards received quite a number of ex-Huddersfield PD3A/2’s with Roe bodies, and these certainly could exhibit a ‘distressing reluctance to stop’, and I had quite a few heart-stopping experiences with some of them. They also used to squeal really loudly.
A number of the original Halifax Regent V’s had already been withdrawn by then, and the remaining ones were rather tired and hard work to drive, giving the impression of being not as durable as the Leylands. There were however three ex-Hebble examples and rather unexpectedly these were considerably better and were really nice to drive. In my experience (I also later drove several ex-Bradford ones in service, and others in preservation) Regent V’s could vary tremendously from one operator to another according to their specification.
Back to the original topic – Manchester CVG6’s. Before I was at Halifax I was a Schedules Clerk at SELNEC Central, based at the former Salford depot at Frederick Road. Some of these 44xx series Daimlers had been allocated there and I rode on them on a number of occasions. Though like most CVG6’s they were steady plodders (I hate to think what the CVG5 was like), they were highly regarded for their total reliability, and to me seemed to be really solid buses for their age.

John Stringer


NNB 231_lr Vehicle reminder shot for this posting

21/02/14 – 06:50

I came across the 2012 correspondence re Manchester’s old Daimler CVG5 and -6 buses and I can remember their presence in the south of the city. The 4000-99 batch were always on the 101 service in the early ’60s and also seemed to do the rush-hour extras and school contract work. It seems that the body-weight/engine size combination meant that they could only work ‘flat’ routes such as those around Wythenshawe, but it was a surprise to come across a colour image of one of them running on one of the city’s sink estates-built at the end of a long climb from the city-centre-against a background of houses that were built ca. 1968. The bus had good-looking paintwork and was carrying blinds for a local service (the ‘211’ [now the 201]) but was ‘off-route’ and the number-blinds had the non-standard ‘2-11′ mix instead of the Hyde Road ’21-1’ (based on the former trolley-bus route-number sequence ‘210’ to ‘219’), so it seems to have been pulled from the scrap-line for a special photo-session. It’s hard to believe that the Hyde Road management would condone the release of even a scrap bus for anything as frivolous as this, and the CVG5, given its alleged poor performance would never have worked the area (which only saw the odd, end-of-life, Crossley (2078 was one example) being given an optimistic morning duty that would give it a mostly-downhill trip carrying a full load of passengers. These Daimlers had/have been special to local bus anoraks because of their peculiar exhaust sound-effects, and it’s possible that the picture had some connection with a last-minute attempt to preserve one of them. Does anyone know any more?

John Hardman


 

Quick links to the  -  Comments Page  -  Contact Page  -  Home Page

 


 

All rights to the design and layout of this website are reserved     

Old Bus Photos from Saturday 25th April 2009 to Wednesday 3rd January 2024