Potteries Motor Traction – Daimler Fleetline – 5001 VT – L 1001

Potteries Motor Traction - Daimler Fleetline - 5001 VT - L 1001

Potteries Motor Traction
1964
Daimler Fleetline CRG6LX
Alexander H41/31F

Photographed in June 1970 at Manchester, and mercifully still retaining its Potteries livery and logo, is Daimler CRG6LX Fleetline No. L 1001, 5001 VT, with Alexander H41/31F bodywork, the first of a batch of twenty five delivered in April 1964. Ten similar vehicles followed in 1965. L 1001 seems to be remarkably coy about showing its destination, reducing its passenger information down to a sticker in the windscreen. Was this route not a standard operation for this type of vehicle, which would not then have had Manchester on its blind display?

Photograph and Copy contributed by Roger Cox


17/03/19 – 09:11

Yes Roger,
It should be able to show ‘Manchester’ in the top half of the box (where it reads P.M.T.) and the second line would show X2 in Bold, with Knutsford over Altrincham (where it shows ‘Service’) There are photos on the web of the PD3’s that used to run this service and I have downloaded a copy of Fleetline 964 from the web in exactly the same place showing the full service blind that I refer to.The layover seemed to be quite lengthy and in busy times, the vehicle would have to vacate the stand and park on Lower Mosley Street itself, prior to returning to load up for the return journey. I spent many hours in my spotting days here but sadly I never got to ride on the service, principally as it was an out and back service TO Manchester. These Alexander bodied Fleetlines did not look out of place here as they were look alikes of North Westerns own examples and when PMT provided an NCME bodied Fleetline, of course that resembled LUT’s which used LMS on the Blackpool service, as all had a basic Red/Cream livery.

Mike Norris


18/03/19 – 07:08

North Western’s Fleetlines had single piece curved windscreens, single headlamps and different sidelights and the NWRCC colour scheme with a lighter red and more cream was much less drab. PMT’s colours on its double decker fleet didn’t exactly brighten up the Potteries’ landscape.

Phil Blinkhorn


20/03/19 – 06:15

The PMT vehicles often parked in Whitworth Street West. This road was close to LMS and was between the two railway lines that ran from the old Central Station and the line from Oxford Road. In my spotting days the low bridge Atlanteans were common fare.

Andrew Gosling


20/03/19 – 06:16

The ABC Coach and Bus Guide for the Winter period 1969/1970 contains a timetable for the Potteries to Manchester PMT service X2. Points served were Newcastle-under-Lyme, Hanley, Burslem, Tunstall, Kidsgrove, Lawton Arms, Sandbach, Holmes Chapel and Knutsford. Set downs were at Altrincham, Sale, Stretford and Manchester (Lower Mosley Street). (A full fare table was not shown.
The timetable shows ‘dep’ for departure times up to and including Lawton Arms and ‘arr’ for arrival times at Altrincham and beyond. However, Sandbach, Holmes Chapel and Knutsford have neither ‘dep’ or ‘arr’ which may mean they could have been both pick-up and set down points).
The northbound departure times were:
09:20 from Newcastle-under-Lyme (arriving Manchester 11:30) on Saturdays and Sundays
14:30 from Hanley (arriving Manchester 16:30) on Fridays and Saturdays
The southbound departure times were:
12:00 from Manchester (arriving Hanley 14:00) on Saturdays
18:00 from Manchester (arriving Newcastle-under-Lyme 20:10) on Fridays, Saturdays and Sundays
PMT also ran a Hanley to Birmingham service X1 which had a similar format timetable.

David Slater


21/03/19 – 06:58

Bury also had some Alexander Fleet lines, 117 to 131, later 6317-31, but they had flat windscreens and were the full height version.

David Pomfret


26/03/19 – 06:53

David Slater’s description of the timetable is very helpful. Was it really the case that passengers were only allowed 30 minutes to spend in the city of Manchester.
Barely time to purchase a cup of tea and an Eccles Cake!

Petras409


02/07/19 – 05:59

L1001. 5001 VT was allocated to Newcastle Garage and service X2 was operated by Hanley Garage it may have been the case that ‘Manchester’ was not on the destination blind. Out of interest the bus was destroyed by a fire at Newcastle Garage in 1975.

Leekensian


12/02/20 – 16:38

On a matter related to P.M.T double deck Fleetlines, I recall travelling on Burslem based Northern Counties bodied L967 and noted that the electronic gear shift had been replaced by a floor mounted air assisted unit. If my memory serves me right I cannot recall ever coming across this feature on any other P.M.T. Fleetline. There must have been a reason for this change – I just wonder what it was.

Leekensian


23/02/20 – 09:43

In the early days of semi automatic gearboxes – Fleetline, Atlantean etc – PMT had concerns over the reliability of the ep (electro-pneumatic) valves which actuated the air supply to the different gear ratios. As early as 1957, the prototype PD3 (PMT H7700) had a direct air change from a floor mounted pedestal. On the early Fleetline in particular where the ep valve was mounted on the gearbox bell housing this was vulnerable to serious damage in the (not infrequent) failure of the trailing link coupling between the engine and transmission. This was moved under the lower deck rear seat on later variants of the Fleetline. Just how suspicious PMT were of electro-pneumatic control was evidenced by the removal and blanking off of the neutral warning light on the gearswitch in the cab on the AtlanteansWWG8. I was not aware of this happening with other Operators. Another thought is that the production Roadliners 1965 onwards all had direct air operation from a floor mounted column – the prototype (PMT SN1000 had an ep type gear change). Was the modification on L967 a precursor to the Roadliners? Finally, PMT took 21 single deck Fleetlines in 1970 which had the latest Westinghouse miniaturised direct air gear shift mounted on the steering column. These gave a lot of early trouble where oil in the air pipes caused delay in releasing a gear and effectively had the bus trying to drive in 2 gears for a brief but disconcerting period. Daimler solved this by fitting quick release valves at the gearbox end of each gear air pipe.

Ian Wild


23/02/20 – 16:33

Thanks for your input on Fleetline gear controls. I was aware of the Leyland Pedestal mounted EP’s as Bolton had them on PD2’s and PD3’s. But I am still puzzled about any air change device on Daimlers (there is thread open on the other webpage) I fully understand your comments about the coupling between the 6LX and the Gearbox on Fleetlines, having broken one myself, inadvertently. I was driving LUT Fleetline 184 on service 14 towards New Bury along Bolton Road in Farnworth, a fairly wide road. I was accelerating from a stop and while in third gear needed to pull out to pass a parked van. Indicating this manoeuvre, I became aware of a fairly fast car overtaking me, so came off the accelerator, but then seeing the car flash me to pull out, I re-applied my foot onto the pedal – Bang ! Disaster ! – bits of the coupling came through the bonnet housing, and more were embedded in the engine housing behind the rear seat. I received a caution for poor driving but that was later rescinded when the T&GWU represented me at a disciplinary hearing as the fault became more widely known about. Yes, the later FEGR Fleetlines had a small lever in a mini pneumocyclic style gear change that was mounted on the cab offside (not true Fleetlines though).
So still learning about Fleetlines all these years later, but still believe that electric control was better than air, for the reasons you have stated.

Mike Norris


25/02/20 – 05:49

In reply to Ian, the conversion could have been a precursor to the Roadliners but given that L967 was a 1963 delivery would the Engineering Department at PMT have made the conversion to such a new bus?

Leekensian


29/02/20 – 06:56

 

B.O.A.C. – Leyland Atlantean – LYF 304D

B.O.A.C. - Leyland Atlantean - LYF 304D

British Overseas Airways Corporation
1966
Leyland Atlantean PDR1/1
MCW CH38/16F

In 1940, with Britain at war and civilian air traffic barely existent, Croydon based Imperial Airways formally subsumed the privately owned (though nationally subsidised) British Airways at Heston and became BOAC, though this had been the de facto situation since September 1939. At the end of the war, with Heathrow becoming the major UK airport, the European air passenger traffic business was separated from BOAC in 1946 and named BEA. (British South American Airways, a short lived separate company formed at the same time for the South American air services, was reabsorbed into BOAC in 1949 after the disappearance of two Avro Tudor aircraft over the Atlantic.) To fulfil the road transport requirements between London and the developing Heathrow Airport, the Ministry of Supply allocated BEA and BOAC a number of Commer Q4 Commando 1½ deck observation coaches with Park Royal 20 seat bodywork that had 180 cubic ft of luggage space under the raised rear section. BOAC, operating from the former Imperial Airways building at Victoria, stayed with Commer for its replacement passenger road fleet and took Harrington bodied examples of the early petrol engined Avenger model between 1949 and 1952, though a solitary Harrington C37C bodied Leyland Royal Tiger PSU1/13 came in 1950. The TS3 two stroke powered Harrington Contender then became the favoured choice, and BOAC became the Contender’s best customer taking a total of 28, of which 19 were employed in overseas locations. (Strangely, the Harrington Contender does not appear at all on BLOTW.) The last BOAC Contenders (the figure varies between one and three) reputedly had the Rolls Royce petrol engine (again, sources vary as to whether this was the straight eight B80 or the six cylinder B60) married to a torque converter, a power train concept surely inspired by a variant of the Dennis fire engine. One wonders, however, how this layout could have been accommodated like the flat TS3 engine under the floor of the Contender.

As air travel became more popular, both BEA and BOAC turned to the double decker for the airport links. BEA, whose road operations were overseen by London Transport, took the Routemaster, but BOAC preferred the Leyland Atlantean PDR1/1, purchasing fifteen in 1966, LYF 304D to LYF 318D inclusive, with “Alexander clone” MCW bodies that seated 38 passengers upstairs and 16 downstairs; the vacated space was used for luggage. Later, in 1971, these were supplemented by six PDR2/1, GML 846J to GML 851J inclusive, with Roe CH41/24F bodies. It is thought that all these Atlanteans were operated on behalf of BOAC by Halls Bros. at Hounslow. The picture shows examples of each type at the Victoria terminal building. PDR1/1 LYF 304D was delivered in October 1966, and PDR2/1 GML 847J arrived in July 1971. The BEA and BOAC London – Heathrow road services were taken over by the new British Airways from 1974 and had ceased by 1980, by which time air passengers had become accustomed to booking in directly at Heathrow, and the central London passenger facilities had become superfluous. One of the MCW bodied vehicles, LYF 307D, has been preserved.

Photograph and Copy contributed by Roger Cox


21/01/19 – 07:18

I remember riding in these Atlanteans out from Victoria to Heathrow. The BOAC departure point was the ground floor of their headquarters, which faces Victoria coach station across the road, although given the clientele of both BOAC and long distance coach at the time probably very few transferred between the two.
There have been many memories posted on the web about the buses out to Heathrow, a significant number of which seem to mix up BEA, BOAC and British Airways, the separate London departure points (BEA moved round several time over the years), and the vehicles, inevitably sometimes calling this BOAC fleet "Routemasters". After the merger of the two airlines, although the two bus fleets were painted in a common livery, separate operations were retained, from the different London points to the different Heathrow terminals the two halves of the airline continued to use.
Did Halls actually run the BOAC fleet ? A poster elsewhere on the web says they were employed by BOAC and drove them as part of their other airport driving duties. The vehicle base was in airport property on the north side of Heathrow, where the car parks are now. I saw the preserved Atlantean had been used in a nice British Airways TV ad with a historic theme a few hears ago.
Halls did own another Atlantean fleet, Roe bodied, for US airline TWA, likewise in their colours, used from their Piccadilly terminal, and also for other independent hires, they could be seen at various points around London. Pan Am also had their own road connections, with coaches, from a point in Kensington.

Bill


21/01/19 – 07:19

That was the last type of d/d bus I rode in at the start of my journey in May 1971 to Australia where I still reside.

David Revis


22/01/19 – 07:29

The operation of a bus fleet necessitates facilities for cleaning, washing, fuelling and maintenance. It is possible, perhaps, that the driving staff were BOAC employees, but did the airline really cover all the other essential requirements itself? It is surely more likely that a specialist contractor like Halls would have been used.

Roger Cox


23/01/19 – 06:36

An airline at its main base typically has a very large fleet of motor vehicles of all types, specialist and standard, and a Motor Transport maintenance department to suit. These would operate both airside and on the road. I would imagine the BOAC motor fleet of all types required at Heathrow would dwarf the Hall fleet, the numbers possibly into the hundreds, all of which would require the services described. Further buses were commonly owned for passenger transfer across the apron.
BOAC used to have some substantial articulated passenger trailers at Heathrow pulled by HGV tractor units which shuttled between the terminal and the aircraft. They lasted well into British Airways days. These were an interesting niche about which there is little information.

Bill


23/01/19 – 06:37

I don’t see why BOAC who had a large fleet of lorries and other vehicles as well as buses, would need a coach hire company to maintain their buses at Heathrow when they were perfectly capable of looking after their own buses at Prestwick.

Stephen Allcroft


25/01/19 – 06:55

These services must have had a road service licence, probably the old Express Licence, as they just charged fares, sold at a terminal counter, and anyone could go on them, not just air passengers. 7 shillings and 6 pence (7/6) seems to ring a bell. I don’t recall there being a published timetable (otherwise I would have taken one) but they were fairly turn up and go.
Both BOAC and successor British Airways also ran substantial fleets of regular coaches at Heathrow, Leopards and others, run both airside and landside, for trips such as shuttles to hotels, and I recall these coaches sometimes turned up on the BOAC Central London run as well. I presume the two fleets were kept separate so those used only within the airport could run on red diesel.

Bill


28/01/19 – 07:29

These were certainly operated by BOAC as I worked in the PSV section of the Metropolitan Traffic Area and, unusually, rather than use the post, on occasion a smartly uniformed BOAC employee would turn up with a batch of renewal forms. I seem to recall that the vehicle licences would have been stage, but I don’t doubt that the road service licences would have been express.
I wonder if airside lorries and coaches would have run on red diesel within the airport boundaries as ‘red diesel’ wasn’t available until later, and in any case, there was a lot of domestic air traffic.’Red diesel’ is for agricultural use.

David Wragg


31/01/19 – 06:03

Red diesel is for use by anything that does not run on a public road. Boats, trains, off-road industrial and construction vehicles and plant are allowed to use red diesel as well as agricultural use.

Philip Halstead


31/01/19 – 11:49

Linking in with Philip’s comments, West Yorkshire used red Diesel when running in overhauled engines on the two Heenan & Froude dynamometers in the engine test house at Central Works. A small brick building behind the test house housed a largish fuel tank marked ‘gas oil’ specifically for the red Diesel. The units would probably have been classed as stationary engines whilst on test.

Brendan Smith


04/03/19 – 06:30

Although I realise Roger’s posting is mainly regarding Leyland Atlanteans, perhaps I may be permitted a few words of clarification regarding the Harrington Contenders used by BOAC. Most of the Contenders were petrol powered using the Rootes "sloper" engine as featured in the contemporary Avenger chassis. In fact a number of the BOAC Contenders were in service two years before the TS3 diesel was announced. If the chassis codes are to be believed then only 6 of the fleet were TS3 powered and all of these were exported – as were many of the petrol versions. The petrol engines were front mounted but it seems likely that the TS3 versions were mid mounted in the same way as the coaches that were available for general purchase. The Rolls Royce Contenders were also mid-engine. Modifications were made to the intake system of the down draft carburettors to reduce height and a fabricated sump was made to allow the engine to sit lower in the frame. Two were built, both with B60 engines.

Nick Webster


05/03/19 – 06:51

Thanks for that clarification on the BOAC Contenders, Nick. Yours is the first definitive explanation concerning these remarkable vehicles that I have encountered. One can understand the preference for petrol engines in overseas locations, but why persist with them at home? Again, do we know where the Rolls Royce powered coaches were based, and why such idiosyncratic power trains were felt to be necessary? The expense of so adapting a mere two vehicles could not possibly have been cost effective.

Roger Cox


06/03/19 – 15:33

I made an embarrassing error in my previous post – there were in fact three B60 Rolls Royce Contenders for BOAC, not two as stated. They were JSD 851, KAG 783 and LCS 638, delivered in 1956, 57 and 58 respectively. All went to Prestwick airport, at that time an important hub in trans-Atlantic flight. There they stayed until individually returned to London during 1964-65. After a few months, LCS 638, the first to return was sent out for further use in Karachi. It is known that at least one Commer based coach was also in use there but whether this replaced or supplemented is not known. Never heard of again of course. The other two saw only months of service (or perhaps just stored) before they were disposed via dealer Four Point Garages, Feltham to A. C. Pond Coaches of Roydon. Both were scrapped before the end of three years. They were incidentally, together with an unknown number of the Commers, six inches narrower than the standard 8 ft. coach. I was fortunate enough to obtain drawings from Kirkstall axles, Leeds before they closed down.
In considering the logic of such vehicles, one has to remember that in the 1950s air travel was promoted in rivalry to travel by Luxury Liner and the then necessary coach transfer was no time to let the side down. Furthermore, although diesels reigned supreme in the service bus, many coach operators for private hire insisted on smooth petrol vehicles even after rationing, rising prices and supply problems resulting from the 1956 Suez crisis. For Harrington, even selling as they did to the "top" end of the market, the reason for using a Rolls Royce engine is slightly more prosaic: there was probably a sale on. In the mid 50s Rolls Royce were attempting to increase sales their "B" range of engines and made them available to a wider market. For Harrington this was a last determined attempt to make the various versions of the Contender attractive to all levels of their customers. It is generally considered that Suez killed the Rolls Royce Contender. Indeed, by 1958 the whole integral coach project was scrapped in favour of a new lightweight body later known as the Crusader which was intended to suit the most popular chassis of the day.

Nick Webster


08/05/20 – 06:28

Just a little comment. Opposite the terminal was Victoria Coach Station, where the Gay Hostess coaches operated. BOAC borrowed one for trials and that seemed to spur the idea. BEA used LT Routemasters with a baggage trailer.

David


13/05/20 – 06:58

As this topic has resurfaced I have a question for Nick Webster, please.
I had long wondered what the difference was between the BOAC Contenders with T48B series unit numbers and those with 48A. The T indicating the TS3 diesel engine makes perfect sense now.
It is well documented that Nick’s Contender JAP 698 has unit number 48A5018, which would imply it was petrol-engine originally. A Harrington advert from 9/54 showing JAP 698 states with some ambiguity that the Mk III version ‘now embodies the new Commer diesel engine’. So did JAP 698 briefly have a petrol engine or did Harrington perhaps swap in the diesel one when they were erecting the running units?

Mr Anon


26/05/22 – 05:58

I joined the ‘new’ British Airways Motor Transport Division in 1976. Part of our duties were to operate the Leyland Atlanteans Between Heathrow And B A’s Victoria Terminal and return operations of course. The earlier Atlanteans had no power steering and were moderately hard work but pleasurable to drive. Those of us with PSV all types and HGV class 1’s also operated the Leyland Mastiff tractor units that pulled the passenger transfer trailers airside. (I remember them as Mastiffs anyway). All seriously enjoyable. We had many vehicles including flight deck crew cars and Leyland National single deckers also nice to drive but being rear engined, very ‘light’ on the front end and to be driven even more carefully in the wet.

E J Hunt

 

Aldershot & District – AEC Reliance – VCG 596H -596

VCG 596H

Aldershot & District Traction Co
1970
AEC Reliance 6U3ZR
Duple C49F

Having vacillated for some time before settling upon an underfloor engined saloon chassis, even buying some full fronted Dennis Lancet III coaches in 1953, Aldershot & District finally chose the AEC Reliance as its standard single decker, and stayed with this model for its coach requirements right up to its subjugation to Thames Valley (mis)management from January 1972 under the new guise of Alder Valley. Seen here in The Grove alongside Aldershot Bus Station is No.596, VCG 596H, the first of four 6U3ZR Reliances supplied in 1970 with Duple C49F coachwork sporting the (to my eye) hideous Detroit “inspired” front grille that spoilt many of the later Duple designs. Aldershot & District bought two more Reliances of the 6U3ZR specification in 1971, but these had the aesthetically more pleasing Plaxton C49F coachwork. VCG 596 passed to Alder Valley from 1 January 1972 as No. 49.

Photograph and Copy contributed by Roger Cox


22/12/18 – 06:37

I have to say that I like this coach! Functional, neat without meaningless frippery: where is the Detroit? Burlingham, Whitson, Yeates, other Duple perhaps…this is more Turin!

Joe


22/12/18 – 12:11

Joe – the "Detroit"-inspired part is the full-width chromed grille, which does look rather "overpowering" to my eyes. The chromed strip that runs the length of the body and at across the front at headlight level is also an excessive amount of polished metal.
In a monochrome photo, and wearing a livery with various colours, it doesn’t look so bad, but with a different "livery", and in colour, the effect is pretty dire:- https://thetransportlibrary.co.uk/index.php
I see from other photos that Southdown had the sense to specify their RUF-H batch of Leopards with the same body without the chromed strip on the sides, but they were stuck with the grille.
The polished metal soon went out of fashion, but the advent of the Dominant with curved side windows made the Commander look very old-fashioned in just a couple of years.

Nigel Frampton


26/01/19 – 06:48

The 36ft long AEC Reliance with the AH691 engine & the later AH760 power unit was a real drivers coach & the best premium weight coach on the market until the Volvo B58 surpassed it. With a Reliance the only thing to watch is they tended to run a bit hot on sustained motorway journeys. My boss instructed his drivers to keep an eye on the temperature gauge & if it starts to climb, drop a gear & keep it down to 55 to 60 MPH while it drops. Good advice, never had overheating on later Reliances.
Leyland Leopard, very good, but I think the chassis was more suited to a service bus body rather than a premium coach. As a coach, the gear ratios were all wrong on a semi auto Leopard, but in terms of reliability & strength of the chassis they were unsurpassed.

Andrew Spriggs


26/01/19 – 09:59

Not sure about the overheating: if you had a Sunbeam Imp with the usual gasket problem, going faster improved the air cooling effect!

Joe


06/03/19 – 07:17

I think the overheating problems associated with the Reliance were mainly confined to the wet lined AH470 engine, later replaced by the more successful, dry lined AH505.
The least said about the Hillman Imp, especially the very early examples, probably the better.

John B


26/09/19 – 05:53

I have always seen what you refer to as the Detroit-style grille (I have to agree with Joe that it is more Turin than Detroit) as a clean and elegant successor to the grimace-like grille applied to later Bella-series Duple bodies, itself a massively disappointing successor to the original Bella grille which to my mind was a natural update to the earlier butterfly design.

John Kemplen

 

All rights to the design and layout of this website are reserved     Old Bus Photos does not set or use Cookies but Google Analytics will set four see this

Old Bus Photos from Saturday 25th April 2009 to Wednesday 3rd January 2024