Old Bus Photos

Leeds City Transport – AEC Reliance – KUA 46 – 46

Leeds City Transport - AEC Reliance - KUA 46 - 46

Leeds City Transport
1964
AEC Reliance 2MU2RA
Roe B41D

Seen in April 1970 is Leeds City Transport No. 46, 46 KUA, an AEC Reliance 2MU2RA with Roe B41D bodywork, one of four, Nos. 44 – 47, 44 – 47 KUA delivered in 1964. These followed an earlier order for six similar vehicles in 1962, Nos 39 – 43, 839 – 843 CUM. I understand that all these Reliances had quite a short life of around 8 years or so with Leeds.

Photograph and Copy contributed by Roger Cox


03/12/18 – 07:13

I can’t comment on the others, but 45 and 47 went to Aberdeen. I have a view of each from the late Arnold Richardson’s collection.

Pete Davies


04/12/18 – 06:33

All four were new in August 1964 and withdrawn in December 1970.
44 and 45 went to Aberdeen on 30th June 1971, being followed on 7th July by 46 and 47, retaining the same fleet numbers.

John Kaye


05/12/18 – 07:46

Oh dear, that destination box doesn’t look comfortable, balanced up there.

Petras409


11/12/18 – 07:43

These Reliance’s really came too late. They were in effect an update of the standee single deckers 29-38, to the same 30ft. length when 36 ft. had become available. Getting 41seats into the shorter length, with dual doors meant they had poor access/exit and tight seat spacing. As with many AECs of that design they were not comfortable, or liked by passengers or drivers. Just two years later, the first 36 ft. Swifts with wider doors, easier steps and 48 better spaced seats arrived. They may not have been great, but they were better. In a year or so there were 50 Swifts in operation and 39 to 46 were consigned to relief work and then sale.

Andy Buckland


13/12/18 – 05:53

Several of these also ended up in Scotland with Greyhound of Arbroath.

Chris Hough


07/01/19 – 07:12

I’ve sometimes wondered what was so wrong with the AEC Swift and the Leyland Panther that caused many operators to not get on with them, prematurely retire them (especially London’s AECs) and overall have bad experiences, while the conceptually similar Bristol RE seems to have commonly led a full life with its original operators.
It’s not as if they did not incorporate standard components in use elsewhere.

Bill


12/01/19 – 08:23

In the absence of a more comprehensive reply from someone who knows more, I will say that one of the differences between Bristol’s approach and the Panther/Swift approach was the position of the driveline and its effect on weight distribution. In the Panther and Swift the engine and gearbox were at the extreme rear of the overhang, whereas the RE had the engine further forward, with the gearbox in front of the rear axle.

Peter Williamson


16/01/19 – 07:27

The Panther also had a much weaker frame causing bending and breaking. Even in preservation I can think of a couple where following you can see the curve.

Roger Burdett


17/01/19 – 07:09

The radiator for the Swift was not at the front, as in the Panther or the RE, but tucked away behind a panel in the bodywork behind the offside back wheels.
Although this arrangement probably insured against air locks in the cooling system, it restricted the flow of cooling air over the surface of the radiator and could result in the engine overheating.

John B


18/01/19 – 06:30

My Foden which has the Rad in the same position still airlocks so concur John B comment.

Roger Burdett


18/01/19 – 06:32

In the Bristol RE the drive went forward from the engine to the gearbox located in front of the rear axle, and then back again to the differential. This gave a prop shaft of decent length to accommodate the suspension travel of the rear axle, something that competitive designs (the worst being the Seddon RU) lacked. Contrary to popular belief, the RE did not pioneer this layout. The Rutland Clipper of 1954 used a similar arrangement.

Roger Cox


 

Quick links to the  -  Comments Page  -  Contact Page  -  Home Page

 


 

North Western – Bristol RE – KJA 282F – 282

North Western - Bristol RE - KJA 282F - 282

North Western Road Car 
1968
Bristol RESL6G
Marshall B45F

In its final years, North Western chose the Bristol RE as its standard single deck bus chassis, initially selecting the shorter RESL6G version in 1968 before turning to the longer RELL6G variety from 1969 onwards. The RESL6G saloons numbered forty in total and all came with Marshall bodywork, the first fifteen, Nos 270-284, KJA 270-284F, arriving in January 1968 as B45F. However, Nos 285-309, KJA 285-289F, KJA 290- 309G delivered from July 1968 onwards, had the reduced capacity of B43F. On 1st January 1969 SELNEC PTE was formed, and much of the North Western stage carriage network lay within the designated SELNEC area. After lengthy negotiations, the National Bus Company conceded, and the hatchet finally fell upon North Western in January 1972 when its bus fleet was dismembered, leaving NWRCC as simply a coach operator. Most of the RESL/Marshall buses, including No 282 shown above, passed to SELNEC, but Nos 302 -309 were transferred to Crosville. I am sure that our Lancastrian contributors will be able to tell me the Manchester location of the photograph which was taken in June 1970. One final question – did these buses have Gardner LW or LX engines?

Photograph and Copy contributed by Roger Cox


18/11/18 – 10:41

This is unmistakably in St. Peter’s Square in Manchester and would have to be a tram to make such a manoeuvre now!
282 was one of the batch allocated to Oldham depot and was new in a livery that also had cream window surrounds and, distinctively, cream inside the peaks of the domes as can be seen on sister 281 here: https://davidbeilby
Although 281 survived long enough to get the SELNEC Cheshire fleetname as seen in the linked photo, 282 was repainted earlier as I have a picture of it in October 1970 in the above colour scheme. In your photo it seems to be newly-painted.
As it’s showing "PRIVATE" it doesn’t give much clue as to why it would be there and it may well be working from Manchester to Oldham depots after having been borrowed. It is also just possible, if it is a morning photograph, that it is returning from working the solitary morning peak journey from Mottram to Manchester Lower Mosley Street that was worked by Oldham – it worked out of service from Manchester back to Oldham depot.

David Beilby


20/11/18 – 09:11

It’s not early morning, David. At that point in my life I lived in Farnborough, Hampshire. I would catch an early train from London to undertake my Manchester transport jaunts, so it would be around midday or early afternoon.

Roger Cox


24/11/18 – 06:21

Well, at long last the NWRCC finally got its Bristols once again after more than 20 years.
The Central Library in the background of the photo looks far more impressive nowadays now it has been cleaned of all the grime that had accumulated prior to the Clean Air Act. I still have fond memories of the Library: there were many Saturday afternoons I would spend valuable learning time reading Buses Illustrated and Modern Tramway.

David Revis


24/11/18 – 09:56

North Western received its last Bristols, ordered prior to the effect of the nationalisation of Bristol, in late 1950 these being L5Gs 311-32 EDB 311-320 with Weymann B35R bodies. The RESL6Gs were delivered from January 1968, thus the wait for new Bristols was just 17 years, not over 20. Central Library was cleaned in 1971.

Phil Blinkhorn


25/11/18 – 06:51

The photo was taken in June 1970 and the bus looks freshly repainted. Could that explain why it is where it is? Would it have been repainted in Manchester?

Peter Williamson


15/04/19 – 07:13

To answer the question on engines, they had Gardner 6HLX engines. I have close personal experience of this, being the owner of the surviving member of the batch 299!
For obvious reasons I’ve collected a lot of photos of this batch, and I’ve found that quite a few were repainted from the ‘more cream’ style to the one we see here when quite young. My speculation (no more than that) is that the Marshall paint job wasn’t especially good, these bodies being built down to a price, and North Western gave them a repaint in the by-then current style when only about three years old.
To answer Peter Williamson’s question, it’s almost certain that it would have been repainted at the company’ Works at Charles Street in Stockport and could – conceivably – have been photographed on its way back to Oldham from the repaint.

Paul Williams


16/04/19 – 09:00

Travelling from Charles St to Oldham via St Peter’s Sq is a long way round. In 1970 the shortest route would have been Charles St-Bredbury-Denton-Ashton-Oldham.
Roger says the photo was taken mid day or early afternoon. There are a number of possibilities. David Beilby’s first suggestion; as we can’t determine the driver, some sort of engineer’s run though why go into Manchester?; if this was a Saturday (the lights are on in the library, so not a Sunday), returning from a private hire where the vehicle is not required for a return run, such as taking people from the Oldham area to an event at the close by Free Trade Hall that runs until late evening or returning from delivering people who have been visiting the Oldham area to wherever. Again, it could have run into Manchester as a duplicate on a trans Pennine service and was not required beyond Lower Mosley St or on the return. We’ll never know

Phil Blinkhorn


26/04/19 – 09:44

My own theory on why the bus is in Manchester is that having come out of the paintshop the driver may have been asked to deliver some urgent mail to Lower Mosley Street. It was common practice to send mail on service buses between depots. Oldham Depot only had two AM journeys that returned private back to Oldham. The first was a mentioned by David Beilby. The number 6 duplicate from Mottram. The other journey worked the service 503 from Adswood into the City. Prior to this journey it worked a journey from Ashton-under-Lyne to Hazel Grove (Mirrlees Works). Just a thought.

Keith Hampton


27/04/19 – 13:24

My father was one of the 116 workers entitled to use this service from the newly closed Ashton National Works to Mirrlees. At least in the early days this must have required 2 buses, perhaps one for works and a later one for offices. I presume the service ended at some point after most of the entitled moved or bought cars. Do you know how the return journey late afternoon was organised?

Tony Johnson


28/04/19 – 08:06

Thanks for explaining the origins of this Mirrlees works service. It’s pretty obvious now you mention it but not something I had thought about too much before.
There were two morning journeys from the information I have (which I think is the same that Keith Hampton has). It seems logical that there was an afternoon return service but this does not appear in the Oldham depot schedules, so one concludes it was worked by someone else. Either another North Western depot or another operator (jointly).

David Beilby


03/05/19 – 07:11

Tony Johnson mentions that at least 2 vehicles must have been required for this service.
I can confirm that this was the case, and both journeys were worked by Oldham Garage.
According to my list of Oldham duties:-
One Double Decker (Crew duty 23) departed Ashton Bus Station at 07:05, and a Single Decker (OMO duty 29) at 07:50.
On arrival at Mirrlees both buses then operated from Adswood to Chorlton Street.
Would it have been the case, do you think, that these 2 Adswood journeys would have operated to Lower Mosley Street before the closure of LMS? If that was the case then 282 was possibly heading back to Oldham after completing it work. There is no mention of PM journeys from Mirrlees in the Oldham duties.

Stephen Howarth


04/05/19 – 06:31

Stephen, the use of LMS is a distinct possibility.

Phil Blinkhorn


04/05/19 – 06:32

Unfortunately, Stephen, Roger has already pointed out that he would not have been in Manchester early enough for that to be the case.
I think that there were afternoon journeys but not worked by Oldham. I have a photograph of 932 on this service in April 1972 and that wasn’t an Oldham car at the time, but I don’t know to which depot it was allocated. It’s more likely to be an afternoon shot but I don’t actually know.

David Beilby


 

Quick links to the  -  Comments Page  -  Contact Page  -  Home Page

 


 

Ribble – Leyland Titan TD7 – RN 8979 – 2323

RN 8979

Ribble Motor Services
1940
Leyland Titan TD7
Leyland L27/26R

I cannot now remember where in 1960 I took this rather sad picture of
RN 8979, a former Ribble Leyland TD7 with Leyland L27/26R bodywork, or who the operator then was. The old telephone code HIL (for Hillside) covered the Barnt Green area of Birmingham, which might help to identify the operator. Confirmed Leyland aficionado Ribble must have counted itself lucky to obtain a batch of forty TD7s in May 1940 just after the German attack in France had brought the Phoney War to a violent end.

Photograph and Copy contributed by Roger Cox


12/11/18 – 07:57

I believe they were actually Alexander bodies, Roger, sub contracted and built to Leyland design, as the latter were at that time overwhelmed by work.
I think Samelsbury Engineering also built a few bodies to Leyland design and possibly parts, for the same reason.

Mr Anon


12/11/18 – 07:58

This is recorded by the P.S.V. Circle as being withdrawn by Ribble in 1956 and passing to:-
Smith, Reading 12/56
Liss & District, Bordon 10/58
Trebilock (Finchley Coaches), London N.12 10/59
Dickson, Stoke Mandeville 1/61
last licenced 4/61 and to Ronsway, Hemel Hempstead in 1961, for scrap

I have just checked the old London telephone exchange names and HILlside covered North Finchley tying in nicely with the Trebilcock dates.

John Kaye


12/11/18 – 08:00

I notice that every one of the near side upper deck windows within the five bays has a half drop ventilator fitted. It appears, from photographs of similar Ribble buses I’ve looked at, that the corresponding windows on the off side had no ventilators fitted at all. It seems rather an unusual arrangement, was this Ribble’s normal specification for lowbridge vehicles?

Chris Barker


12/11/18 – 16:07

The nearside half drop would be accessible from the seats, whilst the offside would only be accessible from the sunken aisle so the positioning of the opening windows makes sense.

Phil Blinkhorn


12/11/18 – 16:08

Wow I thought these Blackburn Corporation buses had been scraped. Glad to know they are now vintage buses. My school was on the East Park side of Blackburn and I rode on these to and from school.
They were ancient and noisy to travel in. I enjoyed my journeys. It started a life long interest in buses and travelling on them.
For me these buses bring back my childhood memories of living in Blackburn.
Wonderful bus journeys.

William Ferguson


12/11/18 – 16:10

Thanks, everyone, for the extra information. The Ribble fleet number for this bus was 2323. Alexander did build ‘identikit’ bodies for Leyland, but, in his book on the TD series Titan in the series "The Best of British Buses", Alan Townsin says that these were Leyland bodies, rather than Alexander built clones. Confirmation one way or the other would be welcome.
John, your comprehensive history of this vehicle does confirm that it must have belonged to Finchley Coaches when photographed, which reassures me considerably in my advancing years – I cannot recall ever visiting the Birmingham area in the early 1960s. I am surprised that the less than pristine state of the bus as depicted in the photo still enabled it to work for a further year or so. Chris, I think that a half drop ventilator on the upper deck offside can just be detected through the front upper deck window. It is to the credit of the integrity of the Leyland body design that, after a life of some twenty years. there is no hint of any sag in the waist rail.

Roger Cox


12/11/18 – 16:11

Mr. Anon, There is no record of these on the Alexander records. I think you are confusing things with the early post-war situation which was discussed a year ago on the SCT61 site, and the chassis involved were Leyland PD1 and PD1A types in 1946/7.

John Kaye


13/11/18 – 05:35

Regarding location I think this was at the Austin works at Longbridge. Many of these buses collected workers from the Midlands and were driven by an operative also PSV qualified.

Nigel Edwards


14/11/18 – 07:11

Just a thought re Roger Cox’s possible view of offside half drop windows and the gangway, Is the visible line not more likely to be a handrail fixed to the window pillars?

Stan Zapiec


14/11/18 – 07:12

John: I always thought that Leyland did not, in principle, rebody older chassis. The only exception to that rule being the examples they rebodied for Plymouth Corporation. But, I must be incorrect in that assumption.

Mr Anon


15/11/18 – 07:40

Mr. Anon, I don’t follow your comment on Leyland not in principle rebodying vehicles, in relation to the Ribble vehicle. RN 8979 was new in 1940 with a 1940 Leyland body and so rebodying does not come into the equation.

John Kaye


16/11/18 – 06:59

One might similarly not follow the comment about Blackburn Corporation, but I suppose that, from a passenger’s perspective, there wouldn’t be such a great difference between the above and Blackburn’s PD1s/PD1As, of which Blackburn had rather a lot.

David Call


17/11/18 – 07:42

…although a PD1 and a TD7 would sound rather different in the definitive second and third gear music.

Stephen Ford


17/11/18 – 07:45

Yes John, that is my mistake, at first glance the bus looks like one of Ribble’s pre war Leyland TDs, rebodied after WW2. Some were also rebodied by ECW. But on closer inspection the body fitted to RN8979 is the original 1940 Leyland body. The height of the driver’s door side window, visible through the windscreen, is a give away.
I still maintain that Leyland did not in principle rebody existing chassis, even of their own manufacture, except for the two pre war Titans rebodied with Farrington type bodies for Plymoth. I believe Donald Stoke’s father was GM at Plymouth at the time, which may have influenced their deciscion.

Mr Anon


20/11/18 – 15:09

Ledgards bought two of the early metal framed Leyland bodies in 1934. These caused no end of trouble and Sam being Sam prevailed upon Leyland to rebody them in 1938.

Chris Hough


22/12/18 – 12:21

Chris, Sam was not the only disgruntled operator to trouble Mr Spurrier’s door. On one day he received a delegation, Messrs Sword, Dick and Alexander..

Stephen Allcroft


09/04/21 – 06:36

Further to Mr Anon (17/11/18), a total of eight Plymouth Leyland TD5c, originally Weymann-bodied, were rebodied postwar by Leyland. Two were the last of the 1938 batch (213/4: ADR 813/4), of which 213 became 141 after rebodying. The other six were presumably from the 1939 batch (215-39: BDR 252-76), but there is no acknowledgement on BLOTW of this. 232 (BDR 269) became 143 after rebodying. 213 and 232 later served with Theobald’s of Long Melford.

David Frank


 

Quick links to the  -  Comments Page  -  Contact Page  -  Home Page

 


 

All rights to the design and layout of this website are reserved     

Old Bus Photos from Saturday 25th April 2009 to Wednesday 3rd January 2024