Old Bus Photos

S Bingley – Dennis Lancet – CRE 938

CRE 938
Copyright Unknown

S Bingley (Hemsworth)
1935
Dennis Lancet I
Willowbrook C37F

Dennis Lancet I, chassis number 171027, was bodied by Willowbrook (2830) and seated thirty-seven passengers. It was new in 1935 and was operated by Associated Bus Companies Ltd (formed in 1928 of several local independents) prior to the acquisition of that company by Potteries Motor Traction in 1944. PMT withdrew it from service in 1946 and in April that year it was with S.Bingley, Hemsworth, eventually scrapped by Crossroads Commercials of Leeds in May 1956.
Did S Bingley have any connection with W R & P Bingley of United Services?

Photograph and Copy contributed by Les Dickinson


13/07/15 – 06:23

Given that the most common capacities of the time seem to have been 33 seats in coaches and 35 in single deck buses, 37 coach seats must have been very cramped!

Chris Barker


13/07/15 – 17:01

These Lancet I’s suffered from very heavy-looking radiator shells, unlike the equivalent 1935 Lance rads. It rather spolit the look of them.

Chris Hebbron


13/07/15 – 17:01

Perhaps the cramped seating was one reason why Potteries withdrew an eleven year-old vehicle at a time of severe post-war vehicle shortages? The driving cab also looks very fore-shortened leaving the front of the bonnet some way ahead of it.

David Wragg


15/07/15 – 05:59

I, too, am surprised by the large seating capacity. The Lancet I, which appeared on the market in 1931, had a very bulky and deep radiator shell that was shared by the heavier Dennis haulage models of that time, and the cab front was set behind this cowl. The front wings were swept forward in a manner later adopted by wartime Guy Arabs, and these ‘extensions’ were joined across the front by a kind of bumper bar. All this space inefficient front end had to be accommodated within the overall length of 27ft 6ins, which did not allow for a great capacity within the rest of the bodywork. The later Lancet II of 1935 remedied this shortcoming by having a very slim radiator shell mounted at the extreme front, and this was offset to the nearside to maximise driving cab space. Lancet IIs could be fitted with bodywork seating up to 39 passengers. The Lancet I and II were powered by the Dennis 6.79 litre ‘Big Four’ petrol engine that could be rated up to 97 bhp, a very compact and reliable design employing wet cylinder liners. Versions fitted with the ‘O’ type five speed gearbox could attain 58 mph, so the petrol Lancet was no sluggard. From 1934 the advanced O4 diesel was offered as an option in the Lancet II.

Roger Cox


15/07/15 – 15:25

I’d noticed to ‘Guy’ likeness to the wings, myself, Roger.
Pre-war wet-liner engines never seemed to suffer from the same problems as post-war ones did.

Chris Hebbron


15/07/15 – 19:07

You’re referring to the AEC wet liner debacle, Chris. AEC never did solve its wet liner problems, but the responsibility lay with the Southall firm, not with the wet liner concept. Dennis were engineers of a very high order, and knew how to get it right. The post war Dennis O6 diesel, like the earlier O4, was a wet liner engine with the timing gears situated at the rear of the crankcase, yet both of these design features were regarded with disfavour in some quarters following the shortcomings of AEC (wet liners) and Daimler and Meadows (rear timing gears). The Dennis O4 and O6 also employed four valves per cylinder, the only British production engines to be so equipped. The O6 was an outstanding engine, and installed in the Lancet III, was taken up enthusiastically by many small independent operators who valued its total dependability, notwithstanding its advanced specification.

Roger Cox


16/07/15 – 05:38

Amazing that AEC never cured the liner problem.
Renault cars in the 60/70’s had wet liners and I had two cars with them, as did a friend. They were no problem, but the timing chains were another thing. Poor tensioners and these were rear engines put at the front, so that the timing chains were then at the back. My friend with a Renault 16 cut a hole in the front bulkhead to sort out his, then put a plate back over the hole! Post-war Daimler bus also had rear timing chains, difficult to access without removing the engine. The few D’s with them were removed and replaced by surplus AEC 7.7’s within five years.

Chris Hebbron


18/07/15 – 06:23

An early Lancet I, albeit a Short B32F bodied bus rather than a coach, has, thankfully, been preserved. It was new, probably in 1932, to Smith’s of Westoning in Bedfordshire, a firm taken over by Seamarks of Dunstable. In June 1937 it was sold to K W Services, Daventry who ran it until 1944. In 1946 it became a caravan at Snodland in Kent until 1974 when it was bought for preservation. Apparently, this bus still has no electric starter, and has to be swung by hand! A picture may be found here:- https://www.flikr.com/photos/cheltonian1966/19456538949/

Roger Cox


18/07/15 – 06:24

It would appear that S Bingley died in 1968 and the firm was taken over by Pembertons coaches. There seems to have been an approach by W. R & P Bingley for a license to run some of the coach excursions. However the Traffic Commisioners refused the application due to the fact Pembertons were in final talks with Mr Bingleys widow to take over the coach company. Further information is listed on: //archive.commercialmotor.com/
Pemberton who were based at Upton nr Pontefract I think were absorbed into Welsh’s Coaches who operate from the same depot.

Brian Lunn


20/07/15 – 09:48

Thanks for that link Brian. I guess there was no existing family link or Pembertons would not have got a foot in the door in the first place.

Les Dickinson


16/12/15 – 07:27

Further to Chris Hebbron’s reference to timing chains at the rear of the Daimler CD6 and CD650 engines, that’s not the case, like the Dennis O6 and I believe the Meadows 6DC630 the timing was supplied by a gear train, there is further detail in ‘A Further Look At Buses’ by G. G.Hillditch.

Stephen Allcroft


17/12/15 – 07:39

Gardner’s 15.5 litre 6LYT engine broke new ground for the Company in having a rear-mounted timing gear train, rather than Gardner’s traditional triplex timing chain mounted at the front. The Leyland 500-Series engines as fitted to the Leyland National I, New Zealand Bristol RELLs and quite a number of Bristol VRT3s also had rear-mounted timing gear trains.

Brendan Smith


The preserved Smith’s of Westoning Lancet is now fitted with an electric starter. My 1935 ex-Southern Vectis one was always fitted with a starter but one should not over-estimate their effectiveness. They would start a vehicle with a warm engine, maybe even one that had had been garaged overnight, but were never suitable for a completely cold start. For that you needed somebody in the cab and somebody helping on the handle. I have seen other marques of vehicle that were similar.
For the record there is of course no such thing as a "Lancet 1" – in their time they were just "Lancet". The assumed designation only came about when the Mk2 arrived.

John H


25/06/17 – 09:26

Yes, the original Lancet was just that, like the original Arab, Regent and Regal, and, in the private car world, the Cortina amongst many others. The retrospective application of the appellation ‘1’ or ‘Mark 1’ does clarify the model being discussed. I suppose that, if one wished to be totally accurate, the term ‘1935 Lancet’ should be employed here, but that wouldn’t work either because the Lancet II came out in that same year. Adopting the form Lancet (1), Regal (1) etc seems unnecessarily pedantic to my mind. I should think that only in the military aircraft field would ‘Mark 1’ be used from the start, and then not always.

Roger Cox


 

Quick links to the  -  Comments Page  -  Contact Page  -  Home Page

 


 

London Transport – AEC Reliance – 497 ALH – RW3

497 ALH

London Transport
1960
AEC Reliance 2MU2RA
Willowbrook B42D

497 ALH, AEC Reliance 2MU2RA with Willowbrook B42D body, dates from 1960. She is, of course, better known as seen here in London Transport’s RW3 guise, although she spent some time with other operators – notably Chesterfield with her two sisters. She’s seen at the Alton Rally on 21 July 2013.

Photograph and Copy contributed by Pete Davies


29/03/15 – 17:36

Given the widespread use of this combination within the BET empire, was it just the apparent "not designed in Chiswick" attitude that stopped this type from becoming the successor to the RF in both London Country and Green Line service.

Phil Blinkhorn


29/03/15 – 17:36

This is another example of a manufacturer’s standard type that didn’t last long in London Transport service despite giving good service to many other operators across Britain. Rochdale to name one had some virtually identical vehicles that had full service lives.
Where London Transport’s operating conditions so much different from the rest, particularly in the outposts of the Country area, that they seemed unable to sustain vehicles that ran happily for years with other operators?

Philip Halstead


30/03/15 – 08:04

Phil and Philip,
I suspect you are both right. I’m sure Mr Cox will have something to say on this!!!

Pete Davies


30/03/15 – 08:05

There is already a post of RW1, when in service with Chesterfield Corporation and a very useful post by Roger Cox explaining why it was not popular with London Transport. It’s recorded that the engine/fluid flywheel/gearbox, being mounted in one piece, suffered from overheating problems. Obviously, this was overcome by either LTE or Chesterfield Corp’n, for these vehicles to have had such long subsequent lives. However, removing the unsuitable centre-exit was an expensive option for just three vehicles, hence LTE’s likely disposal, although they could just have been disconnected!
LINK: //www.old-bus-photos.co.uk/?p=584

Chris Hebbron


30/03/15 – 08:06

These buses have been discussed on OBP before – see Chesterfield Corporation – AEC Reliance – 495 ALH – 18. The three RW buses joined the London Transport (Country Buses & Coaches) department at the same time as I did – in August 1960. They were LT’s first experience of dual doorway buses, and drivers strongly disliked the feature. On rural routes, where stopping points were often just hard standing cut beck into the hedgerow at the stop post, the central door opened to reveal an impenetrable barrier of vegetation. They were tried out all round the Country area to a universally stony reception, not just from the operating staff but from the engineers as well. At this time London Transport ran a fleet of totally standardised, bespoke vehicles tailored to the rigid Chiswick/Aldenham maintenance system. LT bus garages did not have "engineers" in the sense understood by Company and Municipal operators. LT employed "fitters". If something went wrong with a vehicle at LT, the offending component was removed and sent to Chiswick, and a fully overhauled part fitted in replacement. The RW buses were London Transport’s first experience of the new breed of AEC wet liner engines, and garages just lacked the knowledge and skills required to remedy the faults that arose in daily operation. The traditional ‘send the part to Chiswick’ mentality couldn’t apply. LT simply capitulated to its absurdly inflexible maintenance system and got rid of the three RWs. However, a virtual carbon copy of the whole sorry saga took place again in 1965 with the Reliance RC class of Green Line coaches. Nevertheless, the ponderous maintenance system still persisted, later showing its deficiencies with the DM/DMS Fleetlines, deemed "unreliable" by LT despite being of a type that ran entirely successfully with everyone else in the land. The MB/MBS/MS/SM types suffered similarly. Strangely, the only exception in this sorry tale proved to be the original eight XF Fleetlines operated by the Country area from 1965. These ran until 1981, proving the soundness of the basic design (i.e. free of LT meddling modifications). They outlasted all the other ex LTE types in LCBS service. The scandalous squandering of public money by London Transport was a national disgrace.

Roger Cox


30/03/15 – 08:06

There are some thoughts here: //www.countrybus.org/RW/RW.htm   Overheating is mentioned, together with difficulties with the centre exits in rural locations.

Peter Williamson


30/03/15 – 14:34

I remember these 3 buses coming to Chesterfield for use on one man services however it was common for them to be used as crew buses. I remember this one was no20 I conducted it one day on the Barlow routes.

Ken Wragg


31/03/15 – 06:53

It’s rather surprising they bothered with the centre exit for the country area. Even taking on board all Roger points out, single door vehicles for the country routes, a dual purpose equipped single door version for Green Line and a dual door version for the central area would likely, with any other operator, have been seen as ideal. Instead they spent money and kept the drawing office busy by updating the RFs.

Phil Blinkhorn


31/03/15 – 10:12

Thank you, gents, for your further thoughts on this shambles. As Roger says, it has been discussed at length in the past. It was not just LT who didn’t like the DM/DMS Fleetlines, however. Readers may recall that a fair number came down to Wilts & Dorset and Hampshire Bus. Stagecoach bought Hampshire Bus and decided that the Southampton area was not profitable enough, so they sold it on to Solent Blue Line, along with the allocation of vehicles.
Among that allocation were Fleetlines. The then manager of SBL decided he didn’t want them, and arranged an exchange with the former Ribble "high" Bristol VR fleet at Carlisle. One of my friends was among the SBL drivers on the exchange visit. He told me at the time it was the fastest the Fleetlines had ever moved, so eager were the local drivers to do the exchange.
Following on from that, we had VRs with Cumberland and Ribble fleet names trundling around Southampton for several months, for the legalities to be sorted out. I was told that not a single one of the Fleetlines moved away from Keswick Bus Station until a scrapper removed them, but the appearance of an EFE model in the ‘deregulation’ Hampshire Bus livery but with Carlisle fleet names suggests otherwise.

Pete Davies


31/03/15 – 15:55

10 DMs and 8 RMs went to Cumberland in part exchange for the highbridge VRs in 1987. The DMs retained their Hampshire Bus numbers 1917-1926 and as far as I am aware most if not all received the attractive CMS Cumberland livery of ayers red and oatmeal. They were placed in service in Carlisle and survived until October 1988 when Stagecoach replaced them with new Olympians. There were also 4 ex SYPTE Ailsas involved in the deal which were not popular and only lasted a couple of months or so. I have never seen a picture of one of the Ailsas in service so perhaps these were the buses that languished at Keswick Pete?

Update on those liveries after trawling the web. It seems the DMs entered service in Carlisle in a mix of poppy red(?), Hampshire Bus blue, white and red, and in CMS ayers red. Its a pity EFE didn’t choose the latter! There are also a couple of pics of the Ailsas working so that doesn’t explain the Keswick conundrum either!

Mike Morton


01/04/15 – 06:22

Thank you, Mike. So that’s where the Ailsas went! I did wonder. I have a photo of one of them in HB livery in Southampton. If you’d like one, I’ll send it to Peter and ask him to forward it. It, clearly, isn’t suitable for this site!!!! I see the captcha code is MW49, or is that MW4G – a bit under-powered, perhaps!

Pete Davies


02/04/15 – 06:26

Whatever the merits or otherwise of these Reliances, surely the point is that LT didn’t actually need any more single deck buses at this stage, being full up with RFs. Agreed, the RFs were very heavy and thirsty and perhaps a case could have been made for some replacement by lighter and more fuel efficient buses, but even that seems unlikely.
Was this more a case of a manufacturer trying to interest its customer in something than the customer actually having a need for something new? LT didn’t actually buy any more single deck buses (as opposed to Green Line coaches) until the Merlin/Swift era.

Richard Delahoy


02/04/15 – 06:27

I wonder why LT specified quarter-lights. I see that Chesterfield painted over them.

Geoff Kerr


02/04/15 – 16:51

Peter, would love to see the Ailsa. Much appreciated.

Mike Morton


03/04/15 – 05:36

Chesterfield did not paint over the quarter lights.

Ken Wragg


04/04/15 – 06:36

Must be an optical illusion, Ken. Other photos show them still in use.

Geoff Kerr


10/06/16 – 16:43

In answer to Roger Cox view about the operation of the Reliance class (RW) during their brief but fruitful stay with London Transport over the three years…
It was nothing to do with the servicing of these vehicles at the garages but purely the economics that came out of the research programme.
Many of London Transport country routes in the 1950 and 60s had interworking schedules not like the LT central area where one bus would work a number of different routes during a roster. This provided challenges as some routes such as LTs 383/384 at Hitchin would be in town for a period and then out into to remote countryside.
The routing and operational challenges here were often loadings, terminating agreements, and the remit to go to one person operation where in some instances a conductor was required to facilitate the reversing based on vehicle size.
In addition, LT wanted to increase the capacity of their vehicles and reduce route timings to improve efficiencies (debatable as history shows).
There were initial issues with the running of this type….. Overheating and the reliability of the doors were just two but generally they went well in comparison with the Regal Four (RF) and Regent (RT) double deck types.
LT found quite soon that operation of the slightly wider body in narrow lanes and two the door arrangement proved unpopular with staff and passengers (as Roger highlighted) in country locations when the vehicle was positioned to pick up passengers at the stop…. the centre doors would be out of position for alighting.
Drivers by default would have to double stop to let passengers on and off making the centre doors redundant and increase schedule timings as a result. Councils who had responsibility for the stopping points were not willing to fund widening or a new alighting point without subsidy. LT in the end decided that it would not be feasibly at that time to continue with this arrangement. This is just a potted history of events and there were other political / operational issues besides.
Hope this helps

Colin Rivers (one of the fortunate owners of RW 3)


10/06/16 – 19:35

Some very interesting thoughts there, Colin!

Pete Davies


 

Quick links to the  -  Comments Page  -  Contact Page  -  Home Page

 


 

PMT – AEC Reliance – 761 CVT – C8761

PMT - AEC Reliance - 761 CVT - C8761

Potteries Motor Traction
1958
AEC Reliance 470
Willowbrook C41F

PMT had five of these coaches plus one similar acquisition on a Leyland Tiger Cub chassis from the takeover of Dawsons, Ash Bank. They suffered as always with AH470 engines with cylinder head gasket and wet liner seal failures. This is why this photo was taken adjacent to Llandrindod Wells Railway Station on a summer evening in June 1971. A similar Reliance had taken a party of Scouts on a weeks expedition to Tenby and inevitably the engine had failed in South Wales. I was summoned at short notice to take a replacement vehicle arriving at South Wales Transport Ravenhill Depot shortly before midnight. I chose the scenic route rather than the M6/M5 as I didn’t fancy becoming another engine failure casualty at the side of the Motorway. During 1971 and 1972 three of these Reliances were modified for one man operation and repainted in bus livery. The conversion included jack knife doors the motor for which would only fit in the space occupied by the nearside front passenger seat hence reducing the capacity to 39. As the vehicles were 13/14 years old by this time one wonders if it was really worth the effort. I recall 762 which was allocated to Biddulph Depot put in some quite respectable mileages as an omo saloon.

Photograph and Copy contributed by Ian Wild


16/11/14 – 09:44

An odd design which seems to transition from the early 1950s at the front to the late 1950s at the rear.

Phil Blinkhorn


16/11/14 – 11:21

JCN 449

Northern General had a batch of very similar C37F Willowbrook Viking coaches on an AEC Reliance 2MU3RV chassis, so as I understand it, they would have had the larger AH590 engine. Delivered in 1959, they were JCN 445 to 454, numbered 1845 to 1854. About 1967, it was decided to convert them for use as OPO vehicles, but the changes were far more radical. I don’t know if the conversion was carried out ‘in-house’ or whether they went back to Willowbrook to be done, but the whole front end was chopped off, and a new service front grafted on, I believe they were also up-seated to 41. Here is an example of the end result, I believe they remained in service until around 1975

Ronnie Hoye


16/11/14 – 18:03

Were the gasket/liner problems eventually cured by AEC?

Chris Hebbron


17/11/14 – 06:47

In a word, Chris – No! AEC’s involvement with wet liners began in 1935 with the introduction of the ‘6.6’ A172 engine (actually of 6.75 litres) in the lightweight Regal II. This engine proved to be decidedly troublesome, and the wet liner problems were carried through into its postwar ranges developed from about 1953. In the end, AEC reverted to dry liners in the AV/AH 505/691/760 engines. By contrast, Dennis employed wet liners in its ‘Big 4’ petrol and O4/O6 diesels from the mid 1930s onwards, and all were generally free of the troubles that plagued the AEC efforts.

Roger Cox


17/11/14 – 06:47

2MU3RV was still the AH470, Ronnie – 2U3RA was the AH590. Both of these had wet liners and gasket head problems. The AH691 and AH760 were new dry liner engines which did not have the same problems. Sadly the reputation was tarnished and many did not return to AEC. Also, like the later Leyland Panther, others persevered and overcame the problems.

David Oldfield


17/11/14 – 09:51

Thx, Roger. It’s amazing, from what you say, that folk continued to buy AEC’s with these engines, if they were so troublesome, although I admit that post-war distress purchasing would retain undeserved loyalty to a large extent. Were LTE’s engines of this type? I’ve never heard of problems with those Incidentally, did AEC/Leyland ever offer ‘outside’ engine options at ordering stage, such as Gardner? I’ve never heard of any, but who knows?
David O, strange that, following on with gasket/wet liner problems, which existed for decades, AEC cured Crossley’s engine breathing problem within months!

Chris Hebbron


17/11/14 – 11:37

The AV (vertical) engines never suffered to the same extent as the horizontal AH engines and substantially LTE had no problems with RMs (once the teething problems were ironed out) – including the AV590. Neither did Sheffield with its Regent Vs and Bridgemasters. [In passing, the AV version of the AH691 was actually a wet-liner and really an "out-boring" of the AV590.] It is surprising that they carried on so long before they eventually reverted to dry-liners – and as I said lost friends along the way. Those who stayed were rewarded by the AH691/760. AEC were not alone in having problems with putting an engine on its side. I am a "fan" of the O.600/O.680 – but this was not without its problems either – as Stephen Barber has alluded to in his Wallace Arnold Books. Conversely, there was enough faith in the later AEC engines to offer them, initially, as an option, in Series 2 REs and VRTs. The famous Werner Heubeck at Citybus who force BL to continue the RE for Northern Ireland was known to be very interested in an AH691 RE but BL back out at the last minute and cancelled the option – much to Heubeck’s anger. [Something similar is thought to have happened with the VRT – when someone showed interest, the option was withdrawn.] As for Gardners, there were the famous Rochdale D2RAG Regent Vs and the less famous Glasgow and Aberdeen D2RVG Regent Vs.

David Oldfield


17/11/14 – 16:50

Huddersfield JOC took delivery of 16 Regent’s and 37 Regal’s with 6LW engines between 1935 and 1939.

Eric Bawden


17/11/14 – 17:19

Forgot those, Eric. Crossley engines were another, and simpler, matter. AEC basically knew the problem – Crossley refused to pay royalties to Saurer and so mangle the design of the piston/cylinder head to make it different. AEC simply came up with a design which solved the problem without infringing the rights of Saurer. [I’m not an engineer, so I cannot elucidate.]

David Oldfield


18/11/14 – 06:23

As I have always understood it, the bored out 11.3 litre version of the AEC AV590 wet liner engine was the AV690, which was introduced at the same time in 1958. It was most commonly employed in commercial vehicle models such as the Mammoth Major V and in many export PSV’s, but was optional in the 2D version of the Regent V, and in horizontal AH690 form in the 2U and 4U larger Reliances, though it was not differentiated in the model designation.
The AV/AH691 was the 11.3 litre dry liner engine which was announced in late 1964 at the same time as its smaller equivalent the AV/AH505. The AV691 was then offered as an option in the Regent V and Renown, models, which were then designated Regent 691 (prefixed 3D) and Renown 691 (prefixed 4B) though none of the latter were built.

John Stringer


18/11/14 – 06:23

David, the wet liner 11.3 litre was the AV/AH 690. The 691 was a dry liner in vertical and horizontal formats. Even the switch to dry liners did not resolve AEC’s engine reputation. The AV/AH 505 in particular soon revealed weaknesses in service. A cover plate was fitted on the top of the block under the cylinder head, and this plate was held in place by a number of set screws. The inevitable expansion and contraction of this component in service caused the screws to fail, leaving a hole that allowed coolant to escape. This, if not spotted and remedied, could result in a seized engine. The design defects were progressively eliminated, but AEC’s reputation as an engine builder was not enhanced.

Roger Cox


18/11/14 – 06:24

Ronnie – that’s a proper bus conversion done by Northern, however as they were done in 1967 they would operate for quite a few years to get the money back. We only started conversions in 1971 and as I said, perhaps a bit late in the day – but don’t forget PMT had the largest fleet of Roadliners in the world and anything had to be tried to mitigate the chronic unreliability.

Ian Wild


18/11/14 – 06:25

Chris, for a short period in 1956/7 the AEC Regent V was offered with the option of a Gardner 5LW or 6LW engine. There were only three takers; Glasgow and Dundee Corporations bought examples with vacuum brakes and spring operated preselector gearboxes (model D2RV6G,) and Rochdale Corporation had examples with air brakes and air operated preselector or semi-automatic gearboxes, model D2RA6G. The Rochdale examples were described in my article on this site.

Don McKeown


18/11/14 – 10:19

The prototype Crossley HOE7 engine design came about when the firm’s engine designer, W.C. Worrall wwas diagnosed with tuberculosis prior to the outbreak of WW2. He was sent to Switzerland to recuperate, and, whilst there, visited the Saurer factory, where he himself had once worked. Saurer gave him permission to use the company’s advanced four valve head and toroidal piston cavity in his new engine design. Shortly after Worral’s return to Britain, war broke out, limiting Crossley’s commercial options, but three prototype engines were constructed with combustion chamber detailed design being made by Leslie Bennett, a mathematician and combustion specialist. Thus Crossley had done all the right things and succeeded in a designing a powerful and reliable unit. Then, as the new SD/DD42 chassis production began to get under way in 1944, Saurer, entirely reasonably, asked for a royalty or licence payment in recognition of the fact that the Swiss company’s patents were employed in the head design. The exact details of the fees involved have since been buried in the passage of time (probably deliberately). The Crossley MD, Arthur Hubble was having none of this, and refused to comply, instead ordering that the cylinder head of the new engine be redesigned completely to avoid any payment to Saurer. The new head had two valves per cylinder instead of four, and the toroidal piston cavity was reshaped with sharp concentric ridges, the (misplaced) theory being that these would improve the swirl effect. The new head was married up with the original block intended for the Saurer type head, and the result was a motor strangulated by hopelessly contorted airflows. In addition, poor coolant circulation led to overheating and high back pressure in the crankcase. This ill advised redesign ended the involvement of Saurer, but left Crossley with a exceptionally poor engine. When AEC took control of Crossley, it lost patience with Gorton’s refusal to attend to the cylinder head deficiencies and undertook remedial design itself. It is an overstatement to suggest that AEC simply solved the problems with the Crossley engine. The downdraught cylinder head was not a cheap conversion, and, although it did improve the airflow characteristics and reliability issues to a very great extent, the HOE7 could never be turned into a truly good motor. What baffles me somewhat is the fact that Dennis used a four valve head and toroidal piston cavity in its O4 and O6 diesels, yet no payment was ever made to Saurer. Presumably the Dennis design differed sufficiently to escape the Saurer patents.

Roger Cox


18/11/14 – 15:50

Aberdeen Corporation did have five Gardner engined AEC Regent V’s with Crossley bodies (205 – 209). In 1959 they purchased five AEC Regent V’s with AEC engines and Alexander bodies (271-275). By 1963, they also had been fitted with Gardner 6LW engines.
I seem to recall that Maidstone and District also converted some coaches in the same manner as that done by Northern General.

Stephen Bloomfield


19/11/14 – 05:57

Stephen, I think the Maidstone vehicles you refer to had Harrington bodies but the end result was quite similar.

Ian Wild


24/11/14 – 17:03

On the subject of seized AEC Reliance engines I Drove for Stanley Gath Coaches of Dewsbury in the late 1970s. Due to a vehicle shortage one weekend a AEC Reliance/Plaxton was hired from Kirby Coach dealers of Sheffield. Returning from Blackpool on the Saturday night the engine seized up on the M62. Rather then owning up to this, a visit was made to a scrappers at Barnsley and a similar engine was obtained and shoe horned in. I dare say no one was ever the wiser.

Philip Carlton


25/11/14 – 06:31

Thx, folks, for the answers to my queries.

Chris Hebbron


 

Quick links to the  -  Comments Page  -  Contact Page  -  Home Page

 


 

All rights to the design and layout of this website are reserved     

Old Bus Photos from Saturday 25th April 2009 to Wednesday 3rd January 2024