Old Bus Photos

Gem Luxury Coaches – Bedford OB – ETL 221

ETL 221

Gem Luxury Coaches
1950
Bedford OB
Plaxton C29F

A rare sight today is this Bedford OB. Rare because it carries a Plaxton body rather than than the ubiquitous Duple Vista which survives in greater numbers. Chassis number 134198, body number 579 was new to C W Blankley (Gem Luxury Coaches) Colsterworth in June 1950. It is now owned by Mr Ken Edwards of Llanon in Cardiganshire and who shows it with pride at many events near and far every year. This view sees it in August 2016 at an event organised in honour of the memory of Stan & Wyndham Rees, formerly of Midway Motors, Crymych. Appropriately this well-attended event was held in fields directly opposite Midway’s depot in Pembrokeshire.

Photograph and Copy contributed by Les Dickinson


25/08/16 – 06:12

Now this is a real beauty and an interesting one because the door is positioned further forward than on the contemporary Duple Vista. Judging by the small window ahead of the door, it would appear that this coach didn’t have a front seat beside the driver. I may be in a minority but I’d say this Plaxton body beats the Duple version on looks and style but without that much coveted front seat, I’m afraid several points must be deducted!

Chris Barker


26/08/16 – 05:11

I’m sure someone will know the actual dimensions but when seen alongside the Duple version, Plaxton’s offering was noticeably taller than the other. My personal opinion of the design is that the ‘fin’ shaped moulding towards the front spoils what is otherwise a decent design.

Les Dickinson


26/08/16 – 05:13

Sorry, Chris B – rare as it is, I am glad the Duple version was the most common. Somehow the Plaxton version just seems wrong. The deep windscreens give it a goggle-eyed appearance and the heavy streamlining makes the rear end look to be sagging. No doubt to save money, Plaxton seemed to have used a full-front, forward-control body design and adapted it to a normal control chassis. Duple, on the other hand, designed the Vista from scratch, with all the right proportions. Mind you, if this turned up to offer me a ride, I’d jump on board!

Paul Haywood


26/08/16 – 14:15

I agree with Paul, the Plaxton design was not as attractive as the more popular Duple Vista, and did not have the front seat beside the driver. I am not sure how many Plaxton bonneted ones were built and they went over to the even more ugly full front version which retained the original radiator grille & headlamps, none of these according to my records have survived.

EAJ 679

Only one other bonneted one EAJ 679 preserved with Lockett of Henfield ironically in almost same colour scheme to ETL 221 above owned by Ken Edwards of Llanon

John Wakefield


27/08/16 – 05:35

Despite being a huge fan of older Duple body designs, including the Vista, I have to help balance this thread by saying that I think the Plaxton K3 body looked really well on the OB, even preferring it (only just) to the Vista – a bit less dumpy and with neater windows, though the Vista may have looked slightly better from the back (not appreciable on these photos). It’s of course all in the eye of the beholder, as they say.

John Stringer


27/08/16 – 15:31

A photo of the rear of EAJ679 can be found at this link: //tinyurl.com/zc5fcmn  
Although it could be argued that the Vista rear with twin windows and other aspects like fake bumper is a little more fussy, I prefer it to the Plaxton, which is rather bland, some might argue plain. However, liveries can make a real difference to a PSV’s looks, as we all know.

Chris Hebbron


27/08/16 – 15:32

HGE 219
Duple

ETL 221_2
Plaxton

Photos of Duple Vista & Plaxton rears for comparison

John Wakefield


28/08/16 – 06:21

Yes, the rear view has clinched it for me. Duple wins with the pleasing windows, the more attractive mouldings and the colour break at the waist level, rather than, awkwardly, reaching to the floor with the roof colour.

Petras409


28/08/16 – 06:22

MYB 33

Here’s another comparison for the discussion. MYB 33 and ETL 221 are seen – front ends only – at Weymouth on 1 July 1979.

Pete Davies


28/08/16 – 10:41

I have to agree on one major point with Petras409. While I am a great admirer of both the Duple and the Plaxton designs – and their quality construction – I’m the first to acknowledge that the strange "archway" effect at the rear of the Plaxton is very distinctly "prewar" – and the same applies even on the full size versions. A real case of "spoiling the ship for a ha’porth of tar."

Chris Youhill


28/08/16 – 16:25

I see that most here prefer the Duple rather than the Plaxton design for the OBs illustrated. I do tend to agree, but I do wonder whether it is because the Duple was so widespread, whereas the Plaxton was less common? I wonder what we would be saying if the quantities produced were reversed, and we would measure everything else by the Plaxton design? Would we be saying the Duple was too fussy? Just food for thought. . .

Michael Hampton


28/08/16 – 16:26

The frontal design of the Duple blends the bodywork neatly into the taper of the bonnet in a way that gives the design a classic, unified appearance. On the Plaxton, the bulkhead behind the engine forms a flat projection beyond the bonnet sides in a manner adopted by some other coachbuilders on bonneted chassis, Strachans, for example. Those were the days when Duple bodies were in the forefront of styling and construction. From the later 1960s they were the amongst the ugliest things on the road.

Roger Cox


25/12/17 – 06:43

Very nice vehicle!
I am trying to find out a little more about C W Blankley and Gem Luxury Travel. Does anybody know anything about them?

Richard Oakley


26/12/17 – 12:04

This is from memory only, and should not be considxered "gospel".
I believe that some, if not all, Gem operations were acquired by Fairtax of Melton Mowbray, run by John Penistone on behalf of Midland Fox, during the latter companies widespread expansion scheme immediately after privatization. I seem to remember some marketing-led "Gem-Fairtax" references, but as this was about the time of my departure from Midland Fox to pastures new at Shearings I cannot be certain.

Malcolm Hirst


26/12/17 – 12:11

Further to my previous comment I have just read on a local history page comments by Mrs. Blankley about the end of the company. She said that post-deregulation it was impossible to sell bus businesses as "anybody" could start up and she sold the coaches.
I surmise therefore that Fairtax acquired the goodwill attached to the name. I have no recollection of any vehicles being taken over by Fairtax , but they could have "after my time". It would be interesting to know what happened to their contracts and private hire book.

Malcolm Hirst


27/12/17 – 06:47

One thing which was notable about Gem (Blankley) was in being the recipient of what was, numerically at least, the first AEC Reliance, chassis MU3RV001. Body was Roe C41C, and looks a bit angular, I think we can say that Roe did quickly improve the design. https://thetransportlibrary.co.uk/

David Call


28/12/17 – 06:27

Further info on Gem-Fairtax.
In British Bus Days there was a low-cost unit based in London Country area called Gem-Fairtax Ltd,whose head office was 30 Millstone Lane,Leicester (the Midland Fox head office).
Coincidentally (?) there was an unconnected (?) Fairtax operation based at the former Blands of Stamford depot, which was run (coincidentally?) by one Brian Garrett, the former owner/manager of Wreake Valley Travel which was a Midland Fox subsidiary after an anti-competitive buy out in early deregulation times.
By the time of the new Fairtax operation the original (Midland Fox) Melton Mowbray Fairtax operation had been remerged into Midland Fox. The "new" Fairtax had a number of minibuses from similar sources to some of Fox’s second-hand purchases which may or may not have been ex Midland Fox.
It all seems somewhat incestuous, and bearing in mind British Bus ( or rather Drawlane it’s immediate predecessor) and it’s financial methods not at all strange.
All this information is available on various different web sites,and while the connections might be somewhat tenuous, it is not difficult to draw certain conclusions which may or may not be correct.
Bear in mind also that Steve Telling (of Tellings-Golden Miller) was involved with Midland Fox at this time, that could explain the Gem-Fairtax connection in Surrey. Tellings-Golden Miller were actually the purchaser of V&M Grendon/Hills of Stockingford and NWP Travel (Powner) of Hinckley which were lumped together in one operation and subsequently disappeared without trace although the Powner premises were used by Midland Fox’s Hinckley minibus unit.

Malcolm Hirst


29/12/17 – 07:38

Cecil William and John Clifford Blankley began trading as the Gem Bus Service in 1926 with market day services to local towns using a second hand Chevrolet. Later a daily Grantham to Melton Mowbray service was added.
Lincolnshire Road Car acquired the business with five vehicles on February 28th 1935 and the brothers then became drivers for LRCC at the newly opened outstation at Colsterworth.
During the war Cecil Blankley restarted as Gem Coaches with a second hand Commer. A quite significant fleet was built up with a fair number of coaches bought new.

Nigel Turner


29/12/17 – 11:38

A couple of other titbits.
Midland Fox bought Blands of Stamford the location of the "new" Fairtax. The Melton Mowbray operation traded as Melton Bus and Coach for a time. The "new" Fairtax morphed into " Fen Travel" and competed strongly with Viscount. It’s opening fleet included 2 VRs, and 2 ex Barton Leopards – all from the Midland Fox fleet.
While beyond the scope of the interests of people reading this website, it is quite probable that the financial manoeuvring of this labyrinthine is possibly even more interesting than the vehicles operated!

Malcolm Hirst


 

Quick links to the  -  Comments Page  -  Contact Page  -  Home Page

 


 

Hanworth Acorn – Seddon Pennine IV – DAN 400H

Hanworth Acorn - Seddon Pennine IV - DAN 400H

Hanworth Acorn
1970
Seddon Pennine IV
Plaxton C51F

Hanworth Acorn of Bedfont, Middlesex, was ever an enterprising operator, if not entirely wise, in its choice of vehicles. In 1958 it bought 776 LMU, one of the two rear engined Rutland Clippers made – the other was TKE 741 which went to Aston’s of Marton (though it is rumoured that a third one was constructed), both of which were fitted with Whitson C41C coachwork :- www.flickr.com/photos/
Though generally having been previously a Bedford operator, from 1970 Hanworth Acorn became firmly wedded to the recently introduced Seddon Pennine IV chassis equipped with Plaxton Panorama Elite coachwork:-

CLK 100H and CLP 200H (both C51F, 1970)
BYH 500H (C45F, 1970)
DAN 300H and DAN 400H (both C51F, 1970)
DLD 800J and DLD 900J (both C44F, 1971)
HMF 600K (C53F, 1972).

The picture shows DAN 400H at Brighton during the 16th British Coach Rally in 1970.
In the Pennine IV, the raucous Perkins 6.354 engine of 5.8 litres was fitted vertically, low down, at the front of the chassis, which had a high flat frame throughout its length. The earlier machines had the naturally aspirated version of the 6.354 which developed 120 bhp at 2800 rpm, and drove through a five speed, direct top, Eaton synchromesh gearbox and an Eaton two speed rear axle. HMF 600K had the turbocharged T6.534 giving 145 bhp (later 155 bhp) at 2800 rpm coupled with an overdrive top five speed box, and this vehicle was tested by the Commercial Motor journal in September 1971. A comment was made about the stiff and and highly sensitive steering that required perpetual correction to keep the machine in a straight line, and this resounded with my own experiences of the Pennine IV. I took one of these, albeit with Pennine bus bodywork, from Gomshall to Loughborough, and I unhesitatingly declare that it was the most horrible psv that I have ever driven in my life (though the Cummins engined Leyland Lynx runs it a close second). The racket from the engine was truly deafening, and the decidedly erratic steering characteristics were exactly as described by the CM tester. Like all vehicles with the gearbox mounted behind a front mounted engine, the gear selector was awkward to use, and the brakes and suspension seemed in keeping with the generally primitive character of the entire design. Even contemplating the handling characteristics of the Pennine IV when fitted with heavy coach bodywork makes my blood run cold. What this chassis was like when equipped with the optional 8.36 litre 170 bhp Perkins V8.510 doesn’t bear thinking about.
From 1972 Hanworth Acorn persisted with the fundamentally similar T6.354 powered replacement model, the Pennine 6 (Seddon went back to Arabic numerals) taking the following with Plaxton Coachwork:-

HYV 700K (C57F, 1/72)
LGJ 444K and LGN 222K (C51F, 2/72)
LLD 333K (C57F, 3/72)
LLY 111K (C45F, 4/72)
RLO 300L and RLO 400L (C57F, 6/73)
RLO 500L (C51F, 6/73)
SMH 100M and SMH 200M ((C57F, 6/74)

Hanworth Acorn suffered cash flow problems and ceased trading early in 1975. One wonders if the standard of “sophistication” offered by the Seddon Pennine contributed to this ignominious outcome.

Photograph and Copy contributed by Roger Cox


04/07/16 – 08:59

A Pennine IV has been preserved by Roger Burdett – picture and details at //www.sct61.org.uk

Ken Jones


05/07/16 – 06:47

Interesting views. I am enjoying driving mine which is fitted with a Perkins V8 540.I will give you the steering is a little twitchy but the gearbox is a delight and when cruising the V8 "noise" I find not overloud.
Maybe it has been "sorted" after 45 years and certainly the 6.354 engine had a noisy reputation whereas the V8 burbles.
Mine is fitted with Girling air over hydraulic brakes system and they are really sharp.
It will get a good test at Alton RE Running day on July 16 with full loads and all day running so be interesting to see how I feel after that

Roger Burdett


05/07/16 – 06:48

The usual wisdom is that the Pennine IV had the naturally aspirated 6.354 or the V8, and only the Pennine 6 had the T6.354. HMF 600K is described in the September 1971 Commercial Motor road test variously as Pennine VI and Pennine Six, and the test coincides with the announcement of that new model in another part of the same issue. However, BLOTW has it as a Pennine 4 (sic), so perhaps the truth is that it was built as a Pennine IV to a development spec which became the Pennine 6.

Peter Williamson


03/08/16 – 08:57

The Pennine VI is a very different animal to the Pennine IV. The Pennine VI was designed as a 12M chassis using the T6354 as the V8 was too heavy for the front axle. The Pennine VI used a totally different braking system too. I own probably the sole surviving Pennine VIs. Did my time on them and the VI was an excellent machine which certainly served us well.

Russell Price


04/08/16 – 09:10

The Pennine IV had air hydraulic brakes, whereas the Pennine 6 was equipped with a full air system. Though fundamentally very similar, the Pennine 6 chassis ended just behind the rear axle while that of the IV continued beyond to give rear support to the bodywork. Also the 6 had tubular chassis cross members instead of the channel section variety used in the IV. I note that the two present day owners of Pennine coaches are well satisfied with their machines. All I can say is that, when, with a splitting headache, I handed over that Pennine IV at Loughborough, I took a Bedford YRQ back to Surrey, and the difference was profound, like exchanging a Massey Ferguson tractor for a Rolls Royce. I had driven YRQs many times before, and admit to having had a bit of a patronising attitude towards Bedfords in general, but that visit to Loughborough imbued in me a new respect for the marque. Yes, General Motors had far greater resources than Seddon, whose products were basically an assemblage of proprietary parts, but at least it got the thing right. Mercifully, I never drove another Seddon.

Roger Cox


04/08/16 – 13:30

Roger, Think if I drove my Seddon every day I might share your opinion!

Roger Burdett


09/08/16 – 06:07

After the above revelations about the differences between the Pennine IV and 6, I have gone back to the Commercial Motor road test, and there is no doubt that they thought HMF 600K was the latter – it is described as having full air brakes and tubular chassis cross-members. The announcement of the new model can be viewed at //tinyurl.com/gphfoe4  and the road test report at //tinyurl.com/j3zbhye

Peter Williamson


12/08/16 – 11:08

The comments above are very interesting. However, some of the information is quite wrong!
Former Managing Director
Hanworth Acorn Coaches, Ltd.

Mr Anon


13/08/16 – 07:07

Well, Mr Anon, by all means put things right. We, on OBP, are entirely happy to have our errors or misapprehensions addressed. None of us on here are sensitive plants fearful of different views. That’s what makes this site the lively forum that it is.

Roger Cox


14/09/16 – 06:20

The Pennine 6 was fitted with Centrax Stopmaster brakes as later fitted to Volvo F6 trucks and later on the Bedford YNV in beefed up form. The Pennine IV had full air Girling brakes as fitted to Bedfords YRT rather than a air over hydraulic system. The Pennine 6 also featured spring parking brakes. The Pennine 6 also featured a very early use of intercooling too.

Russell Price


16/09/16 – 07:15

Just checked my workshop manual and parts books and yes the Pennine IV was on full air Girling brakes with the lever parking brake.

pen3

We ran about 10 Pennine 6s between 1975 and 1989 and would agree that when putting drivers in them for the first few days they hated them, but after that we found that they took to them and generally thought well of them.

Russell Price


16/09/16 – 08:56

Thanks for your first hand corrections and experiences of these machines, Russell. I sincerely trust that your Plaxton bodied coaches were significantly better soundproofed than the Pennine bodied bus that I drove. That thing required the driver to wear industrial specification earmuffs. I have never driven anything else so noisy. The steering was also a very suspect feature of the Pennine IV, hopelessly over sensitive.

Roger Cox


16/09/16 – 17:04

The front axle wasn’t really up to the job and we converted a couple to Bedford YRT Front axles which helped the twitchy steering, however the primary reason for the axle change was because the axle beam used to wear allowing the pins to move in the beam which would give you the steering you describe. we only had a Later Pennine IV V8 Plaxton on Demo and sent it back as it was found for our operation to be not as suitable as the Pennine 6 which we already knew well.

Incidentally one of ours was the last Hanworth Acorn coach SMH100M. Incidentally the photo is taken at the gate to the old Seddon Works at Royton at the last factory open day before closure. The chassis was assembled in the building partially visible through the gate. CDC with its 2 speed Eaton axle is a super drive and will fly and return 17-18 mpg.

Russell Price


16/09/16 – 17:05

KWW 901K

Here is a picture of the Seddon I drove up to Loughborough, Pennine IV KWW 901K, with Pennine B56F bodywork. I can’t find the negative, so I have had to scan the print. It was previously owned by the firm of Morris of Bromyard, and a picture of it may be seen on this site:- www.flickr.com/photos/nebp2/ Tillingbourne (understandably) only used it in service for a month before selling it on to Yeates in September 1977. I believe that, in order to save weight, these Seddon bus bodies did not have a full body underframe, and were attached directly to the chassis. The Perkins 6.354 was ever a raucous beast, but these Pennine bodies certainly seemed to act as effective amplifying chambers, a view confirmed by passenger trips on the Provincial examples. I have certainly never driven anything else so noisy, especially at motorway speeds.

Roger Cox


17/09/16 – 18:33

KWW was of course new to Wigmores at Dinnington and nearly made it into preservation! It lasted a good long old time in West Wales and suvived until the mid 90s! This followed on from a line of Willowbrook bodied VALs Wigmores had. Whilst i would agree the pennine IV was a fairly crude piece of equipment by UK standards Seddon couldn’t build enough of them for their export markets where the Pennine IV with its simplicity would have been its main point. Bermuda, Phillipines, Cyprus Australia all took the Pennine IV . There was a Pennine V too , there only being one in the UK , the rest of which there were a good number built were all exported. That was a rear engined monster. Your comparison with a Bedford YRQ was interesting as i would think that there were more Pennine IVs built than YRQ Bedfords. The YRQ was a very Competent machine upon which many rural operators relied on. We were a mainly Bedford Fleet with the Seddons thrown in the mix too and a couple of Leylands too. A Mk 1 National and a Tiger bought new.

Russell Price


16/10/18 – 07:30

DAN 400H

Here is another shot of DAN 400H taken at the 1970 British Coach Rally.

Roger Cox


 

Quick links to the  -  Comments Page  -  Contact Page  -  Home Page

 


 

Western Welsh – Leyland Leopard – OUH 177G – 177

Western Welsh - Leyland Leopard - OUH 177G - 177

Western Welsh
1969
Leyland Leopard PSU3A/4RT
Plaxton C49F

Western Welsh buses ran in a maroon livery however this smart blue and ivory was applied to coaches for a period. OUH 177G is a preserved example of the Leyland PSU3A/4RT (900597) with Plaxton Panorama Elite C49F coachwork (693263). The batch of six delivered in April 1969 were fitted with a five-speed semi-automatic gearbox and two-speed rear axle. This one is seen at the 2016 Swansea Bus Museum Running Day.

Photograph and Copy contributed by Les Dickinson


25/04/16 – 18:05

I’m surprised nobody else has commented, Les. Very nice view, and thanks for posting. I’ve been doing battle with my computer system [going back to a Windows machine from an Apple] otherwise I would have commented before.
I’m still not finished and am currently trying to get some backup copies restored by my local photographic dealer. (Most have copied happily, some have been reluctant to do all their contents and a few won’t do anything!)
It’s very pleasant to see a Western Welsh coach in "proper" colours rather than the white paint carried by her sister 176G, which I had published one these pages some while ago.

Pete Davies


28/04/16 – 07:10

WKG 138

I have attached a photo of Western Welsh WKG 138, an AEC Reliance 470 with a Weymann C39F body new in May 1961. It was on hire to PMT in May 1970 along with several others of the batch and is pictured outside Stoke No 1 Garage. I think this body style was unique to Western Welsh and (to my mind) could hardly be described as attractive. Hope this is of interest.

(A rather younger version of IW is in the driving seat!!!)

Ian Wild


29/04/16 – 06:13

Ian, you described the looks of WKG 138 very tactfully, although it does have its charms despite (to my eyes) looking somewhat like a frog wearing safety goggles. It must be admitted that 177 certainly leaves it standing in the beauty stakes though. The Plaxton coachwork looks simply stunning in Western Welsh’s cream and blue livery. Interesting that the Company chose blue rather than red or maroon for the coach livery. I wonder what the reasoning behind it was.

Brendan Smith


29/04/16 – 07:55

Its a shame that they had to bend the windscreen panels to fit them in.

Joe


02/05/16 – 06:43

Brendan, I believe that "powder blue" was the livery of WWOC’s predecessor South Wales Commercial Motors – although why WWOC decided to adopt it as their coach livery . . .

Philip Rushworth


02/05/16 – 14:03

Brendan’s description "a frog wearing safety goggles" is brilliant ! I can see exactly what he means.

John Stringer


02/05/16 – 14:04

Thanks for the information Philip. It’s certainly an attractive shade, especially when matched with cream/ivory.

Brendan Smith


07/05/16 – 17:31

I was never lucky enough to drive an Elite like this – when I started PSV driving in 1979 it was Supremes that we had at Salopia and then Shearings.
But when I did my HGV training at Bassetts at Stone in the 1990s they still had a few Elites older than this one (ISTR a "D" registered one at least) running around on schools contracts. I asked if they would sell me one but they said "no" on the grounds that with them being 45 instead of 53 seats, they were easier to turn into school driveways.
But out of interest, where would anyone go (apart from eBay) to find something like this for sale these days. I’d love to have my own old "Plackie" to go on day trips out.

Eric Hall


08/05/16 – 05:58

Eric – your best option is probably to buy a copy of "Bus & Coach Preservation" and keep an eye on the adverts section. It is published monthly, and I think that Plaxton Elites come up occasionally (I cannot see any in the current issue). To the best of my knowledge, the earliest Elites were G-suffix registrations. I’m not an expert, but my understanding is that the structure is not always as good as the vehicle might look – and certainly not as solid as an ECW body!
The Western Welsh blue and royal ivory coach and DP livery was actually quite short lived. It first appeared in 1965, and all new coaches and DPs delivered from 1965 to 1971 were delivered in it, as well as the 1972 coaches. Older vehicles were repainted in the blue/ivory during that period, but by 1972, the company had reverted to dark red and cream for DPs. Towards the end of the period, the fleetname was replaced with a large block lettered variety. I seem to recall reading that the shade of blue was known as "peacock".

Nigel Frampton


09/05/16 – 16:49

I have just bought a J reg Elite. Certainly they were renowned for drooping behind the rear axle and mine was no different. 60 man hours and some steel later all sorted and MoT obtained.

Roger Burdett


10/05/16 – 06:47

When you refer to the solidity of ECW body designs, Nigel, I assume that you do not include the B51 in that description, though much of the blame lay with Leyland. The B51 was designed for the RE, but Leyland decided to fit it to underfloor engined chassis with no proper rear chassis support for the boot area.

Roger Cox


11/05/16 – 06:27

Well, Roger, I was thinking more of contemporaries to this Western Welsh vehicle, for example the first style of coach body on a Bristol RELH chassis. Those were definitely solid!
Unfortunately, under Leyland’s influence, and possibly a more general pressure to cut costs, the quality deteriorated in later years, and I have read somewhere that, for example, the second type of RELH coach body was also not as solid as its predecessor. But I agree, the B51 was poor – perhaps, the exception that proves the rule!

Nigel Frampton


11/05/16 – 06:28

The Elite is most correctly described as the ‘Panorama Elite’ although as time went by the ‘Panorama’ was dropped in everyday speak. The earliest examples were G-reg, restyling seeing the introduction of the Panorama Elite II and Panorama Elite III, the final examples being P-registered. When grant doors etc were specified, the word ‘Express’ was added to the body designation eg: Plaxton Panorama Elite II Express, which probably accounts for the general term ‘Elite’!

Philip Lamb


 

Quick links to the  -  Comments Page  -  Contact Page  -  Home Page

 


 

All rights to the design and layout of this website are reserved     

Old Bus Photos from Saturday 25th April 2009 to Wednesday 3rd January 2024